SHEET RUBBER
For Special Materials
and Military Specifications
Sheeting Calendered in 36" Wide Rolls
Smooth, Cellophane Finish
48" Wide Rolls. Available
R.M.A. Tolerances unless otherwise specified

Specifications Hardness
AMS 3205 Low Temperature 50 + 5
AMS 3207 Weather Resistant 30 + 5
AMS 3208 Weather Resistant 50 + 5
AMS 3209 Weather Resistant 70 + 5
AMS 3212 Aromatic Fuel Resistant 60 + 5
AMS 3215 Aromatic Fuel Resistant 70 + 5
AMS 3240 Weather Resistant 40 + 5
AMS 3241 Weather Resistant 60 + 5
MIL-G-1149B Type I Medium
Class 1 Neoprene
50 + 5
Class V Buna-N
50 + 5
MIL-G-1149B Type II Medium Hard
Class 1 Neoprene
65 + 5
Class V Buna-N
65 + 5
MIL-R- 2765C Buna-N 35 + 5
MIL-R-3065 SC 310 Neoprene 30 + 5
MIL-R-3065 SC 410 F2 Neoprene 40 + 5
MIL-R-3065 SC 515 Neoprene 50 + 5
MIL-R-3065 SC 615 F2 Neoprene 60 + 5
MIL-R-3065 SC 715 Neoprene 70 + 5
MIL-R-3065 SC 815 F2 Neoprene 80 + 5
MIL-R-3065 SB 615 F2 Buna-N 60 + 5
MIL-R-3065 SB 715 ABEF2 Buna-N 0 + 5
MIL-R-3065 SB 815 F2 Buna-N 80 + 5
MIL-R-6855 C-1-40 Fuel Resistant 40 + 5
MIL-R-6855 C-1-50 Fuel Resistant 50 + 5
MIL-R-6855 C-1-60 Fuel Resistant 60 + 5
MIL-R-6855 C-1-70 Fuel Resistant 0 + 5
MIL-R-6855 C-1-80 Fuel Resistant 80 + 5
MIL-R-6855 C-11-40 Oil Resistant 40 + 5
MIL-R-6855 C-11-60 Oil Resistant 60 + 5
MIL-R-6855 C-11-80 Oil Resistant 80 + 5


SPECIAL BUNA-N
40-P-389 40 + 5
50-P-388 50 + 5
60-P-387 60 + 5
70-P-386

70 + 5


HIGH GRADE BUNA-N
Style No. Tensile PSI Ult. Elong.%  
40-P-179 b>1000 500 40 + 5
50-P-266 1500 400 50 + 5
60-P-187 b>1500 b>300 60 + 5
b>70-P-135 2000 400 70 + 5
80-P-206 1500 150 b>80 + 5
b>90-P-270 b>2000 100 90 + 5

HIGH GRADE COMMERCIAL NEOPRENE
Style No. Tensile PSI Ult Elong.% Durometer Hardness
30-E-242 1000 550 30 + 5
40-E-247 1200 400 40 + 5
50-E-503 1500 350 50 + 5
60-E-306 1500 350 60 + 5
70-E-313 1500 325 70 + 5
80-E-325 1500 250 80 + 5
90-E-228 1500 90 90 + 5
"1300 SERIES" NEOPRENE
1000 lbs. and over, mixed thicknesses and hardnesses acceptable

AVAILABLE IN: 1/64" | 1/32" | 1/16" | 3/32" | 1/8" | 3/16" | 14"
Call for Pricing.

30-E-244     30 + 5
40-E-203     40 + 5
50-E-213     50 + 5
60-E-235     60 + 5
70-E-238     70 + 5
80-E-572     80 + 5
Under 1000 lbs.
      30 & 80
      40-70
 
5100 SERIES" NEOPRENE (51% NEOPRENE BASE)
1000 lbs. and over, mixed thicknesses and hardnesses acceptable
40-E-423 1000 360 40 + 5
50-E-357 1000 520 50 + 5
60-E-264 1000 400 60 + 5
70-E-321 1000 340 70 + 5
Under 1000 lbs.
      40-70
EPDM:
40-K-38 1000 350 40 + 5
50-K-42 1500 375 50 + 5
60-K-20 1500 450 60 + 5
70-K-52 1500 300 70 + 5
80-K-36 1500 250 80 + 5
VITON:
75-F-6 1800 200 75 + 5
*BUTYL
60-F-56 1000 300 60 + 5
*HYPALON
60-H-17     60 + 5
WHITE - Meets FDA ingredient requirements
55-F-146 1000 660 55 + 5
65-F-364 1000 600 65 + 5
75-F-100 600 500 75 + 5

HEAVY SHEETING
"5100 Series" Neoprene (51% Neoprene Base)
Available: 3/16" | 3/8" | 1/2"
Style No. Tens. PSI Durometer Hardness
40-E-423 1000 40 + 5
50-E-257 1000 50 + 5
60-E-264 1000 60 + 5
70-E-321 1000 70 + 5
1 ROLL LENGTHS

5/16" ARE 19-1/2" FT. TRIMMED OR 39 FT. LONG UNTRIMMED
3/8" ARE 16-1/2" FT. TRIMMED OR 33 FT. LONG UNTRIMMED
1/2" ARE 12-1/2" FT. TRIMMED OR 25 FT. LONG UNTRIMMED


SILICONE (RED) COMMERCIAL
Style No. Hardness Thickness
40-S-561 40 + 5 1/32"
50-S-562 50 + 5 1/16"
60-S-563 60 + 5 3/32"
70-S-564 70 + 5 1/8"
3/16"
1/4"

PURE GUM FLOATING
Available in: 5/16" | 3/8" | 1/2"
Call For Prices : Per Square Yard
Rolls are Untrimmed
Style No. Tensile PSI Hardness
40-R-149 (Light Tan) 35 + 5
40-R-169 (Dark Brown) 35 + 5
0 to 2500 Pounds call call
2500 Pounds and over call call

HEAVY SHEETING

White - Meets FDA Ingredient requirements
Available in : 5/16" | 3/8" | 1/2"
55-P-146 1000 55 + 5
65-P-169 1000 65 + 5
Pure Gum
40-R-144 Light Tan 35 + 5
40-R-169 Dark Brown 35 + 5

1 ROLL LENGTHS - 5/16" ARE 19-1/2 FT. TRIMMED OR 39 FT. LONG UNTRIMMED

3/8" ARE 16-1/2" FT. TRIMMED OR 33 FT. LONG UNTRIMMED

1/2" ARE 12-1/2" FT. TRIMMED OR 25 FT. LONG UNTRIMMED

FOR FOOD SERVICE WHITE NEOPRENE F.D.A. SPEC.
Available in : 1/16 | 3/32 | 1/8 | 3/16 | 1/4 | 3/8 | 1/2


Stk. No. Lb./Ft. 1/8" Dur. Tens. Elong.
4834 WHITE 55 1000 600
36" 3.27      
48" 4.36      
WHITE NITRILE/VINYL F.D.A. SPEC. U.S.D.A. APPROVED
6461 WHITE 60 1300 400
36" 2.50      
48" 3.33      
6462 WHITE 70 1600 400
36" 2.57      
48" 3.42      

COMMERCIAL NEOPRENE SLABS
$100.00 Set up on Slab orders under $300.00
Style No. Tensile PSI Hardness
36" x 36" Molded Slabs
40-E-203 1000 40 + 5
50-E-213 1000 50 + 5
60-E-235 1000 60 + 5
70-E-238 1000 70 + 5
80-E-572 1000 80 + 5
48" x 48" Molded Slabs
40-E-203 1000 40 + 5
50-E-213 1000 50 + 5
60-E-235 1000 60 + 5
70-E-238 1000 70 + 5
80-E-572 1000 80 + 5

ELECTRICALLY CONDUCTIVE SHEET
(RUBBER)
SMOOTH FINISH - BLACK
1/16" -1" STANDARD WIDTHS - 36" 48"

PRICE PER LINEAL FOOT
THICKNESS - INCH

Available in : 1/16 | 3/32 | 1/8 | 3/16 | 1/4 | 3/8 | 1/2

Stk. No. Approx. Lb./Ft. 1/8" Dur. Tens. Elong.
Rubber
5000   70 2800 300
36" 2.3
48" 3.1
Neoprene
5085   70 2400 400
36" 2.7
48" 3.6

X-RAY PROTECTIVE SHEET SMOOTH FINISH Quantities of less than a standard press length (approximately 14-1/2 ft.) supplied only if in stock. Otherwise minimum order 300 lbs.
THICKNESS & WIDTH Lb./Ft. No.1435 Lb./Ft. No.1642
1/32 x 24 1.7 1.6
1/32 x 36 2.5 2.4
3/64 x 24 2.5 2.4
1/16 x 24 3.4 3.2
1/16 x 36 5.0 4.8
1/8 x 24 6.6  
1/8 x 36 10.0  
1/6 x 36 13.4  
ELECTRICALLY CONDUCTIVE CORRUGATED MATTING
(NFPA No. 56 MAX. 50,000 OHMS)
Made to order - C.I. (1 ply cloth inserted)
Minimum order - 75 feet of one thickness one stock no.
Available in : 1/8" | 3/16" | 1/4"
STOCK NO. TYPE
5000 M Rubber
24"
Lbs./ft.
36"
5085 M Neoprene
24"
Lbs./ft.
36"
Ft./Roll Approx. 75/150

POLYURETHANE
PRECISION CAST SHEET AND SLABS
Available in thermoset formulations
MP-600-750-850-950-160-175.
Sheet Size
1/32" x 48" x 48"
1/16" x 48" x 48"
3/32" x 48" x 48"
1/8" x 48" x 48"
5/32" x 48" x 48"
3/16" x 48" x 48"
1/4" x 48" x 48"
5/16" x 48" x 48"
3/8" x 48" x 48"
1/2" x 48" x 48"
5/8" x 48" x 48"
3/4" x 48" x 48"
1" x 48" x 48"
1-1/4" x 24" x 48"
1-1/2" x 24" x 48"
1-3/4" x 24" x 48"
2" x 24" x 48"

FABRIC-BACKED SHEETS AND SLABS
Available in all grades MP-600-750-850-950, but stocked in MP-750 and MP-850.
Dimensions listed are overall, approximately 1/16" of overall thickness is fabric.
Sheet Size
3/16" overall x 48" x 48"
1/4" overall x 48" x 48"
5/16" overall x 48" x 48"
3/8" overall x 48" x 48"
7/16" overall x 48" x 48"
9/16" overall x 48" x 48"

PRECISION CAST TUBES Available in thermoset formulations - MP-600-750-850-950-160-175.
I.D. O.D. Length
1" x 2" x 36"
1-1/4" x 2-1/4" x 36"
1-1/2" x 2-1/2" x 36"
1-3/4" x 2-3/4" x 36"
2" x 3" x 36"
2-1/4" x 3-1/4" x 36"
2-1/2" x 3-1/2" x 36"
2-3/4" x 3-3/4" x 36"
3 x 4 x 36"

Back to RUBBER