BMS numbers with description:
Use Ctrl+F to search this page.
BMS1-2  		SYNTHETIC RUBBER; GENERAL PURPOSE, WEATHER RESISTANT 
BMS1-3  		SYNTHETIC RUBBER CORK 
BMS1-4  		AROMATIC FUEL RESISTANT FLEXIBLE FITTING ASSEMBLIES 
BMS1-6  		MOUNTING; SYNTHETIC RUBBER 
BMS1-7  		CONTROL CABLE AIR SEALS 
BMS1-8  		HOSE: FLEXIBLE COOLING AIR 
BMS1-9  		RUBBER, SPONGE (CLOSED CELL) 
BMS1-10 		SYNTHETIC RUBBER, HOT OIL RESISTANT 
BMS1-11 		WEATHER, LOW TEMPERATURE RESISTANT POLYCHLOROPRENE RUBBER 
BMS1-12 		FLAT GASKET MATERIALS FOR AIRCARFT APPLICATIONS 
BMS1-13 		FABRIC INSERTED AIR SEAL DIAPHRAGM MATERIAL 
BMS1-14 		SYNTHETIC RUBBER - LOW TEMPERATURE 
BMS1-15 		CELLULAR RUBBER 
BMS1-17 		FABRIC, SILICONE RUBBER COATED 
BMS1-18 		SYNTHETIC RUBBER, GENERAL PURPOSE SILICONE 
BMS1-19 		SYNTHETIC RUBBER - HIGH TEMPERATURE 
BMS1-20 		SYNTHETIC RUBBER, FLAME RESISTANT SILICONE 
BMS1-22 		SYNTHETIC RUBBER, LOW TEMPERATURE TEAR RESISTANT SILICONE 
BMS1-23 		SILICONE SPONGE RUBBER, CLOSED CELL 
BMS1-24 		SYNTHETIC RUBBER; OIL, WEATHER AND FLAME RESISTANT 
BMS1-25 		AIR SEAL MATERIAL, DIAPHRAGM TYPE 
BMS1-26 		SYNTHETIC RUBBER, LOW TEMPERATURE FUEL AND WEATHER RESISTANT 
BMS1-27 		SYNTHETIC RUBBER, WEATHER AND HYDRAULIC FLUID RESISTANT 
BMS1-28 		RUBBER, AIR SEAL MATERIAL 20 DUROMETER 
BMS1-29 		RUBBER, SYNTHETIC, CABLE SEAL MATERIAL 
BMS1-30 		INSULATION, PIPE & TUBING, LOW TEMPERATURE, FLEXIBLE 
BMS1-31 		RUBBER, MECHANICAL FORMING 
BMS1-32 		SYNTHETIC RUBBER, TEAR RESISTANT, 70 DUROMETER 
BMS1-33 		SYNTHETIC RUBBER, WEATHER AND SKYDROL 500 RESISTANT 
BMS1-34 		SYNTHETIC RUBBER, TEAR RESISTANT, LOW AND HIGH TEMPERATURE RESISTANT, SILICONE 
BMS1-35 		FABRIC REINFORCED DIAPHRAGM MATERIAL 
BMS1-36 		SYNTHETIC RUBBER, SKYDROL RESISTANT LOW AND HIGH TEMPERATURE SILICONE 
BMS1-37 		SYNTHETIC RUBBER, BUTYL LOW REBOUND 
BMS1-38 		RUBBER, SYNTHETIC, FLAME RESISTANT FOR ABLATION APPLICATIONS 
BMS1-39 		ELECTRICAL CABLE JACKETING MATERIAL, POLYCHLOROPRENE 
BMS1-40 		SYNTHETIC RUBBER, UNCURED, LOW AIR PERMEABILITY 
BMS1-41 		HEAT SHRINKABLE MOLDED AND EXTRUDED MATERIAL 
BMS1-43 		SYNTHETIC RUBBER, FUEL RESISTANT, LOW AND HIGH TEMPERATURE FLUROSILICONE 
BMS1-44 		SYNTHETIC RUBBER, UNCURED, TYGUM MATERIAL 
BMS1-45 		SYNTHETIC RUBBER, HIGH STRENGTH SILICONE 
BMS1-46 		SYNTHETIC RUBBER, HIGH STRENGTH TEAR RESISTANT, SILICONE, FOR ABLATIVE AND INSULATIVE APPLICATIONS 
BMS1-47 		MARKING PATCH SHEET, NEOPRENE ELECTRIC CABLE 
BMS1-50 		SYNTHETIC RUBBER WEATHER, OZONE AND BMS3-11 RESISTANT 
BMS1-51 		CLOSED CELL SYNTHETIC CELLULAR RUBBER, OZONE AND BMS3-11 RESISTANT 
BMS1-52 		SYNTHETIC RUBBER, HIGH PERFORMANCE SILICONE 
BMS1-53 		SYNTHETIC RUBBER, FUEL RESISTANT FLUOROSILICONE 
BMS1-54 		ELASTOMER, SYNTHETIC FOR ELEVATED TEMPERATURE SERVICE 
BMS1-57 		SILICONE RUBBER, BMS3-11 RESISTANT, HIGH PHYSICAL PROPERTIES 
BMS1-58 		SLEEVING, SPLIT MECHANICAL CLOSURE 
BMS1-59 		SILICONE RUBBER, SELF EXTINGUISHING 
BMS1-60 		SPECIALTY TYPE SPONGE RUBBER, CLOSED CELL 
BMS1-61 		MICROWAVE ABSORBING MATERIAL 
BMS1-62 		SILICONE RUBBER, HIGH PERFORMANCE, HIGH MODULUS 
BMS1-63 		SILICONE RUBBER, SELF EXTINGUISHING, FOR AIRCRAFT INTERIORS 
BMS1-68 		MODIFIED CLOSED CELL SILICONE FOAM RUBBER, FIRE RETARDANT, LOW COMPRESSION SET, PHOSPHATE ESTER RESISTANT 
BMS1-69 		SELF-EXTINGUIHING-LOW COMPRESSION SET SILCONE SPONGE RUBBER 
BMS1-70 		SILICONE ELASTOMERIC MATERIAL, VACUUM STABLE 
BMS1-71 		ELASTOMER, SYNTHETIC FOR PASSENGER WINDOW SEALS 
BMS1-72 		SILICONE RUBBER, FIRE RETARDANT, FOR AIRCRAFT INTERIORS 
BMS2-2 		SPRUCE (SITKA), INDUSTRIAL CLEAR 
BMS3-2		CLEANING SOLVENT, GENERAL PURPOSE 
BMS3-3		BONDED SOLID FILM DRY LUBRICANTS 
BMS3-4		FLUID, HIGH TEMPERATURE HYDRAULIC (MLO 7277 MODIFICATION I TYPE) 
BMS3-6		SPECIAL SLIP CLUTCH ASSEMBLY LUBRICANT 
BMS3-7		LUBRICATING OIL, AIRCRAFT AIR COMPRESSORS 
BMS3-8 		SOLID FILM LUBRICANT, LIQUID DISPERSED 
BMS3-9 		CONDUCTIVE LUBRICANTS 
BMS3-11		HYDRAULIC FLUID, FIRE RESISTANT 
BMS3-14		GREASE, HIGH TEMPERATURE 
BMS3-18 		LUBRICANT, SOLID FILM, FOR HIGH TEMPERATURE FASTENERS AND THREADED PARTS 
BMS3-19 		SOLID LUBRICANT COMPACT BEARING MATERIALS 
BMS3-22  		HIGH TEMPERATURE LUBRICANT 
BMS3-23 		ORGANIC CORROSION INHIBITING COMPOUND 
BMS3-24 		GREASE, AIRCRAFT: BALL AND ROLLER BEARING, WIDE TEMPERATURE RANGE 
BMS3-25 		LUBRICANTS, VACUUM STABLE 
BMS3-26 		ORGANIC CORROSION INHIBITING COMPOUNDS, HEAVY DUTY 
BMS3-27 		CORROSION INHIBITING MATERIAL, NONDRYING RESIN MIX 
BMS3-28 		ANTI-SEIZE COMPOUND, GENERAL PURPOSE 
BMS3-29 		ADVANCED ORGANIC CORROSION INHIBITING COMPOUNDS 
BMS3-32 		LANDING GEAR SHOCK STRUT FLUID, ANTI-WEAR 
BMS3-33 		GREASE, AIRCRAFT, GENERAL PURPOSE 
BMS3-34 		GREASE, MAINTENANCE-FREE, ROLLING ELEMENT BEARING, AIRCRAFT 
BMS3-35 		HEAVY DUTY CORROSION INHIBITING COMPOUNDS 
BMS3-38 		CORROSION INHIBITING MATERIAL, NON-DRYING PASTE 
BMS3-39 		SELF-LUBRICATING LINER 
BMS4-1 		ALUMINUM-BALSA SANDWICH PANELS 
BMS4-2 		HONEYCOMB CORE SANDWICH 
BMS4-3 		SPECIFICATION FOR ALUMINUM- HONEYCOMB ALUMINUM FACED SANDWICH MATERIAL 
BMS4-4 		HONEYCOMB CORE 5052 AQLUMINUM ALLOY 
BMS4-5 		HONEYCOMB CORE 3003 ALUMINUM ALLOY 
BMS4-6 		FLEXIBLE 5052 ALUMINUM ALLOY CORE 
BMS4-7 		ALUMINUM-HONEYCOMB-ALUMINUM FACED SANDWICH MATERIAL 
BMS4-8 		PAPER HONEYCOMB CORE 
BMS4-10		SANDWICH PANELS END GRAIN BALSA CORE 
BMS4-12 		WELDED TITANIUM HONEYCOMB CORE 
BMS4-13 		SANDWICH PANELS POLYVINYL CHLORIDE FOAM CORE 
BMS4-15 		WELDED NICKEL ALLOY HONEYCOMB CORE 
BMS4-17 		UNIDIRECTIONAL FIBERGLASS FACED NOMEX HONEYCOMB CORE FLOOR PANEL STOCK 
BMS4-20 		UNIDIRECTIONAL AND WOVEN GRAPHITE AND GLASS CLOTH FACED NOMEX HONEYCOMB CORE FLOOR PANEL STOCK 
BMS4-23 		UNIDIRECTIONAL FIBERGLASS FACED ALUMINUM HONEYCOMB CORE FLOOR PANEL STOCK 
BMS4-25 		HONEYCOMB CORE 5056 ALUMINUM ALLOY 
BMS5-1 		SEALING PUTTY 
BMS5-1-1 		RUBBER, AIR SEAL MATERIAL, 20 DUROMETER 
BMS5-6 		POST ASSEMBLY PRESSURE SEALANT 
BMS5-7 		ADHESIVE, NEOPRENE BASE 
BMS5-8 		SMOOTHING AND FILLING COMPOUNDS 
BMS5-10 		ROOM TEMPERATURE CURING EPOXY ADHESIVE SYSTEM 
BMS5-10-1	CHEMICALLY MILLED STEEL 
BMS5-11 		FILLETING STYLE FUEL TANK SEALANT 
BMS5-12 		FUEL PRESSURE AND MOISTURE SEALANTS 
BMS5-13 		AERODYNAMIC SMOOTHER 
BMS5-14 		ADHESIVE - SYNTHETIC RUBBER, BUNA-N 
BMS5-15 		STRUCTURAL ADHESIVES FOR METAL TO METAL ASSEMBLIES- METALBOND 303 SYSTEM 
BMS5-16 		TWO PART HOLE FILLING COMPOUND 
BMS5-17 		METAL TO METAL STRUCTURAL ADHESIVES FOR ELEVATED TEMPERATURE SERVICE 
BMS5-18 		HIGH TEMPERATURE SEALANTS 
BMS5-19 		PRESSURE, WEATHER AND FUEL CAVITY SEALANT 
BMS5-20 		STRUCTURAL ADHESIVES FOR METAL TO METAL SANDWICH ASSEMBLIES- NARMTAPE 102 SYSTEM 
BMS5-22 		FIREWALL SEALANT 
BMS5-24 		NONSLIP AIRCRAFT WALKWAY COATING 
BMS5-25 		EPOXY-AMINE ADHESIVE FOR NON-STRUCTURAL BONDING 
BMS5-26 		INTEGRAL FUEL TANK SEALANT 
BMS5-27 		DECAL ADHESIVE 
BMS5-28 		HONEYCOMB EDGE FILLING AND POTTING COMPOUND 
BMS5-29 		ADHESIVE: EPOXY POLYAMIDE, 4 COMPONENT 
BMS5-30 		CEMENT - LOW ODOR, SYNTHETIC RUBBER 
BMS5-31 		ADHESIVES FOR MYLAR AND NYLON 
BMS5-32 		PRESSURE AND WEATHER SEALANT, LOW DENSITY 
BMS5-33 		HIGH TEMPERATURE SEALANT 
BMS5-34  		ADHESIVE, FLEXIBLE EPOXY, FOR NON-STRUCTURAL BONDING 
BMS5-35 		ELECTRICALLY CONDUCTIVE SEALANTS 
BMS5-36 		CYANOACRYLATE ADHESIVE FOR NONSTRUCTURAL BONDING 
BMS5-37 		COATING COMPOUND ELECTRICAL INSULATING 
BMS5-38 		ELEVATED TEMPERATURE AERODYNAMIC SMOOTHER 
BMS5-39 		CLEANINESS SEALANT 
BMS5-40 		STRUCTURAL ADHESIVES FOR METAL-TO-METAL SANDWICH ASSEMBLIES BLOOMINGDALE FM-58 SYSTEM 
BMS5-41 		PRESSURE, WEATHER AND FUEL CELL CAVITY SEALTANT, B-52G 
BMS5-42 		STRUCTURAL ADHESIVE FOR METAL-TO-METAL ASSEMBLIES - 350 F CURE 
BMS5-43 		CEMENT-GENERAL PURPOSE-NITROCELLULOSE BASE 
BMS5-44 		TEMPERATURE-RESISTANT, FUEL, PRESSURE, AND WEATHER SEALANT 
BMS5-45 		FUEL TANK SEALANT 
BMS5-47 		BRAZE ALLOY SUSPENDING AGENTS AND BINDERS 
BMS5-49 		STRUCTURAL ADHESIVES FOR METAL-TO-METAL ASSEMBLIES- AEROBOND 3013 SYSTEM 
BMS5-51 		MODERATE TEMPERATURE CURING STRUCTURAL ADHESIVE SYSTEM 
BMS5-52 		NON-ADHERING BONDING VERIFICATION FILM 
BMS5-54 		SEALANT, SILICONE, EXTRUDABLE LOW DUROMETER 
BMS5-55 		CEMENT-SYNTHETIC RUBBER - NAPHTHA SOLUBLE 
BMS5-56 		CEMENT - SYNTHETIC RUBBER WATER DISPERSED 
BMS5-57 		ADHESIVE-SILICONE PRESSURE SENSITIVE 
BMS5-58 		CEMENT - SILICONE - ROOM TEMPERATURE VULCANIZING 
BMS5-59 		CEMENT-SILICONE-THERMOSETTING 
BMS5-60 		QUICK SETTING EPOXY ADHESIVE FOR NON-STRUCTURAL BONDING 
BMS5-61 		ENVIRONMENTAL SEALANT 
BMS5-62 		RUBBER, SYNTHETIC, MASTIC FOR ABLATIVE AND INSULATIVE APPLICATIONS 
BMS5-63 		FIREWALL SEALANT, HYDRAULIC FLUID RESISTANT 
BMS5-69 		LAMINATED ALUMINUM SHEETS - STRUCTURALLY BONDED 
BMS5-70 		STRUCTURAL ADHESIVES FOR METAL-TO-SANDWICH ASSEMBLIES FM-61 SYSTEM 
BMS5-71 		STRUCTURAL ADHESIVES FOR METAL-TO- METAL SANDWICH ASSEMBLIES AF 204 SYSTEM 
BMS5-72 		INSULATION ADHESIVE FOR ELECTRONIC ASSEMBLY 
BMS5-79 		PRESSURE AND ENVIRONMENTAL SEALANT 
BMS5-80 		STRUCTURAL ADHESIVE SYSTEM FOR MODERATE TEMPERATURE CURE 
BMS5-81 		SEALANT, SECONDARY FUEL BARRIER 
BMS5-84 		POLYIMIDE PASTE ADHESIVES 
BMS5-89 		CORROSION INHIBITING ADHESIVE PRIMER 
BMS5-90 		FOAMING ADHESIVES 
BMS5-91 		PRESSURE SENSITIVE FILM ADHESIVE FOR INTERIOR NONSTRUCTURAL BONDING 
BMS5-92 		ADHESIVE, MODIFIED EPOXY FOR GENERAL PURPOSE USE 
BMS5-93 		LOW DENSITY POLYURETHANE SEALANT 
BMS5-94 		ONE-PART ADHESIVE FOR SUSTAINED EXPOSURE TO 250F 
BMS5-95 		PRESSURE AND ENVIRONMENTAL SEALANT-CHROMATE TYPE 
BMS5-101		STRUCTURAL ADHESIVES FOR 180 F SERVICE APPLICATIONS 
BMS5-102		FAST CURE THIXOTROPIC EPOXY ADHESIVE 
BMS5-104 	STRUCTURAL ADHESIVE FOR 350 F SERVICE APPLICATIONS 
BMS5-105 	URETHANE ADHESIVE FOR BONDING 
BMS5-106 	ADHESIVE-FLOOR PANEL BONDING 
BMS5-107 	ADHESIVE - FLOOR PANEL INSERT BONDING 
BMS5-108 	FLEXIBLE SEALING COATINGS 
BMS5-109 	ROOM TEMPERATURE CURING TWO PART EPOXY ADHESIVES 
BMS5-113 	ADHESIVE, NONSTRUCTURAL, TWO PART LIQUID, FOR INTERIOR APPLICATION TO 200F 
BMS5-114 	PLASTIC FILM, HIGH TEMPERATURE RESISTANT, UNSUPPORTED 
BMS5-115 	PLASTIC FILM, HIGH TEMPERATURE RESISTANT, LOW FLOW, UNSUPPORTED, FOR USE AS A HONEYCOMB SEPTUM MATERIAL 
BMS5-121 	POSITIONING FABRIC FOR STRUCTURAL ADHESIVES APPLICATION 
BMS5-122 	ADHESIVE, INSULATION, SELF- EXTINGUISHING, NONCRAZING 
BMS5-123 	FAST-SETTING EPOXY ADHESIVE 
BMS5-125 	COMPOUND, SELF-LEVELING, FOR FLUID DRAINAGE 
BMS5-126 	ADHESIVE: EPOXY POLYAMIDE, 2 COMPONENT 
BMS5-127 	ADHESIVES FOR BONDING DECORATIVE LAMINATES TO INTERIOR PARTS AND CORE SPLICING FOR EXTERIOR PARTS 
BMS5-128 	ADHESIVE, LOW OUTGASSING, LOW VISCOSITY, ROOM TEMPERATURE CURE 
BMS5-129 	STRUCTURAL ADHESIVES FOR COMPOSITE APPLICATION -250 F CURE 
BMS5-133 	CARPET TAPES 
BMS5-136 	SURFACE FILLERS FOR INTERIOR APPLICATIONS 
BMS5-137 	STRUCTURAL ADHESIVE FOR ACOUSTIC PANELS - 350 F SERVICE 
BMS5-138 	CARBON FILLED SEALANT 
BMS5-139 	IDENTIFICATION TAPES, TRANSPARENT OVERCOATINGS USED FOR PRINTED WIRING ASSEMBLIES 
BMS5-141 	ADHESIVE, ROOM TEMPERATURE CURE, HIGH TEMPERATURE RESISTANT MODERATE PEEL STRENGTH, LOW OUTGASSING 
BMS5-142 	LOW DENSITY SEALANT 
BMS5-146 	CARGO LINER JOINT SEALING TAPES 
BMS5-148 	STRUCTURAL REPAIR ADHESIVE FOR METAL BOND, 270 F SERVICE 
BMS5-149 	INSULATION BLANKET TAPES 
BMS5-150 	PRESSURE AND ENVIRONMENTAL SEALANT - NON-CHROMATE TYPE 
BMS5-154 	ADHESIVE FOR COMPOSITE BONDING (350 F CURE) 
BMS5-157 	ADVANCED INSULATION BLANKET TAPES 
BMS5-158 	HEAT ACTIVATED FILM ADHESIVES FOR BONDING DECORATIVE LAMINATES TO INTERIOR PARTS 
BMS5-160 	ADHESIVES FOR PRIMARY STRUCTURE COMPOSITE BONDING 
BMS6-4-1 		SPECIFICATION FOR PAPER HONEYCOMB CORE SANDWICH MATERIAL 
BMS6-8-1 		RIGID, FIRE RESISTANT PLASTIC SHEETING FOR GENERAL PURPOSE USE 
BMS6-8-2 		FLAME RESISTANT POLYESTER FILM 
BMS6-8-3 		SUPPORTED VINYL LAMINATE 
BMS6-8-5 		FORMED THERMAL - ACOUSTICAL INSULATION 
BMS6-8-6 		VINYL COATED SYNTHETIC FABIRC 
BMS6-8-7 		VAPOR PERMEABLE NEOPRENE COATED NYLON 
BMS6-8-8 		STRUCTURAL LOW-PRESSURE LAMINATED PHENOLIC SHEETING 
BMS6-8-9 		Flexible Polyvinyl Chloride Extrusions and Molded Parts 
BMS7-2 		ALUMINUM ALLOY BISCUIT HAND FORGINGS 
BMS7-3 		ZK60 MAGNESIUM ALLOY EXTRUDED BARS, RODS, SHAPES AND TUBING 
BMS7-4 		PURE TITANIUM SHEET AND STRIP (LOW RESIDUAL) ANNEALED 
BMS7-5 		ALUMINUM ALLOY ROLL TAPERED PLATE AND SHEET (7075) 
BMS7-6 		CONSUMABLE ELECTRODE VACUUM ARC REMELTED SAE 9310 STEEL BARS, FORGINGS, AND FORGING STOCK 
BMS7-7 		COMMERCIALLY PURE TITANIUM SHEET AND STRIP ANNEALED 
BMS7-8 		75S-T6 ALUMINUM ALLOY EXTRUSIONS (WITH GUARANTEED MINIMUM LONG TRANSVERSE PROPERTIES) 
BMS7-9 		24S-T4 ALUMINUM ALLOY EXTRUSIONS (WITH GUARANTEED MINIMUM LONG TRANSVERSE PROPERTIES 
BMS7-10		HIGH LEAD BRONZE BAR, CONTINUOUS CAST (75 Cu-20Pb-5Sn) 
BMS7-11 		CENTRIFUGALLY CAST CORROSION AND HEAT RESISTANT ALLOY TUBE STOCK 
BMS7-12 		STEEL PLATE, SHEET AND STRIP, CORROSION RESISTANT 17 Cr 7 Ni 1 AL (17-7PH) 
BMS7-13 		EK30A-T6 MAGNESIUM ALLOY CASTINGS 
BMS7-14 		EZ33A-T5 MAGNESIUM ALLOY CASTINGS 
BMS7-15 		PRECIPITATION HARDENING STAINLESS STEEL BAR, BISCUIT, FORGINGS AND FORGING STOCK (17-7PH) 
BMS7-16 		HK 31XA-T6 MAGNESIUM ALLOY CASTINGS 
BMS7-17 		TITANIUM ALLOY FORGING, BAR AND PLATE (3A1-5Cr) LOW CARBON 
BMS7-18 		FORGINGS-TITANIUM ALLOY 
BMS7-19 		TITANIUM ALLOY FORGING AND BAR (4A1-4Mn) 
BMS7-20 		STEEL TUBING, SEAMLESS, (MECHANICAL) MODIFIED 4330 
BMS7-21 		TITANIUM AND TITANIUM ALLOY DUCTING 
BMS7-22 		MAGNESIUM ALLOY SHEET AND STRIP 
BMS7-23 		ALUMINUM ALLOY PERMANENT MOLD AND SEMI-PERMANENT MOLD 356-T6 CASTINGS 
BMS7-24 		TITANIUM ALLOY FORGING, BAR AND PLATE 5Al-1.5Cr-l.5Fe-l.5Mo 
BMS7-25 		TITANIUM ALLOY ROD AND WIRE (4Al-4Mn) ANNEALED 
BMS7-26 		STEEL BAR, FORGING STOCK, AND TUBING - 4340 MODIFIED 
BMS7-27 		STEEL BARS, FORGING STOCK, AND MECHANICAL TUBING (4330)MODIFIED) 
BMS7-28 		STEEL BARS, RODS AND FORGING STOCK (4340) 
BMS7-29 		STEEL BARS, FORGING STOCK, AND MECHANICAL TUBING (4140) 
BMS7-30 		STEEL BARS, FORGING STOCK AND MECHANICAL TUBING (8740) 
BMS7-31 		STEEL BARS, FORGING STOCK AND MECHANICAL TUBING (8630) 
BMS7-32 		STEEL BARS, FORGING STOCK AND MECHANICAL TUBING 
BMS7-33 		STEEL BARS, FORGING STOCK AND MECHANICAL TUBING (4335 MODIFIED) 
BMS7-34 		4330M SHEET, STRIP AND PLATE 
BMS7-35 		ALUMINUM ALLOY ROLL TAPERED PLATE AND SHEET (X7178) 
BMS7-37 		TUBING, STEEL, CORROSION- RESISTANT (18-8) AIRCRAFT HYDRAULIC SYSTEM 
BMS7-38 		WELD FILLER METAL, NICKEL BASE AND COBALT BASE ALLOYS 
BMS7-39 		TITANIUM ALLOY SHEET, PLATE AND STRIP - 6Al-4V 
BMS7-40 		ALUMINUM ALLOY ROLL FORGED RINGS 
BMS7-41 		CORROSION-RESISTANT STEEL ( AISI 321 OR 347) PNEUMATIC DUCTING 
BMS7-42 		ALUMINUM ALLOY CLAD 7075 SHEET AND STRIP, THIN GAUGE 
BMS7-43 		Ti 6Al-4V ALLOY BAR AND FORGINGS 
BMS7-44 		Ti, 6A1-4V, EXTRUDED AND ROLLED STRUCTURAL SHAPES 
BMS7-45 		AM350 SHEET AND STRIP 
BMS7-48 		CABLE, STEEL (CORROSION RESISTANT) FLEXIBLE, PREFORMED NON-ROTATING TYPE 
BMS7-51 		STEEL, CHROMIUM - NICKEL - MOLYBDENUM - 4340, SPECIAL QUALITY 
BMS7-53 		WELD FILLER WIRE, 16Cr-8Ni-2Mo 
BMS7-56 		TUBING, PNEUMATIC, HASTELLOY X 
BMS7-57 		SOLDERING FLUX, ORGANIC BASE 
BMS7-58 		HIGH STRENGTH STEEL CASTINGS 
BMS7-59 		WELD FILLER WIRE, 17-7PH 
BMS7-60 		STEEL BARS, RODS AND FORGING STOCK (AMS 6407) 1.2 Cr-2.0 Ni - 0.45 Mo 
BMS7-61 		ALUMINUM ALLOY TUBING, DRAWN X7075-T6, SEAMLESS 
BMS7-62 		TITANIUM ALLOY STRIP - 6Al-4V 
BMS7-63 		SHEET AND STRIP SPECIAL TOLERANCES - 17-7PH 
BMS7-64 		AM350 SHEET AND STRIP SPECIAL TOLERANCES 
BMS7-65 		PH 15-7Mo SHHET AND STRIP, SPECIAL TOLERANCES 
BMS7-66 		DILICON METAL POWDER 
BMS7-67 		TITANIUM ALLOY SHEET AND PLATE 6Al - 4V 
BMS7-68 		AM355 SHEET AND STRIP, SPECIAL TOLERANCES 
BMS7-69 		TITANIUM ALLOY, BAR AND FORGING 7Al-4Mo 
BMS7-70 		COLUMBIUM ALLOY WELD FILLER WIRE 
BMS7-71 		WELD FILLER WIRE, 13Cr-9Ni-1Al 
BMS7-72 		ALUMINUM ALLOY PLATES AND SHEETS, BARE, 2014 
BMS7-73 		TUBING, STEEL, CORROSION- RESISTANT (18-8 STABILIZED) 
BMS7-74 		TUBING, STEEL, CORROSION- RESISTANT (18-8) ANNEALED AIRCRAFT HYDRAULIC SYSTEM 
BMS7-75 		WELD FILLER WIRE, ALUMINUM ALLOYS 
BMS7-76 		NICKEL BASE ALLOY SHEET AND STRIP TYPE M-252 - (J-1500) 
BMS7-77 		WELD FILLER WIRE, LOW ALLOY HEAT TREATABLE STEEL 
BMS7-78 		Castings, Magnesium Alloy, High Strength 
BMS7-79 		RENE' 41 TUBING 
BMS7-80 		STEEL-CHROMIUM-MOLYBDENUM- VANADIUM (SAE H-11 TYPE) 
BMS7-81 		WELD FILLER WIRE, 17-4PH 
BMS7-82 		NICKEL BASE ALLOY X (AISI 680, UNS N06002) PNEUMATIC DUCTING 
BMS7-83 		SILVER BASE BRAZING ALLOY 
BMS7-84 		SHEET AND PLATE, 17-4 PH 
BMS7-85 		WELD FILLER WIRE, PH15-7Mo 
BMS7-86 		TITANIUM ALLOY SHEET AND STRIP 13V-11Cr-3Al GENERAL APPLICATIONS 
BMS7-87 		TITANIUM ALLOY SHEET AND STRIP 4Al-3Mo-1V 
BMS7-88 		WELD FILLER WIRE, AM-355 
BMS7-89 		WELD FILLER WIRE, B120VCA 
BMS7-90 		WELD FILLER WIRE, 19-9 WX 
BMS7-91 		PH 15-7Mo EXTRUSION 
BMS7-92 		PH15-7Mo Bars, Forgings, and Plate PRELIMINARY RESEARCH & DEVELOPMENT 
BMS7-94 		STEEL-SHEET, STRIP AND PLATE (4340 MODIFIED) 
BMS7-95 		NICKEL BASE ALLOY, TYPE RENE' 41, SHEET, STRIP AND PLATE 
BMS7-96 		ROLLED OR FORGED BARE NICKEL-BASE, HEAT-RESISTANT TYPE RENE' 41 
BMS7-97 		MOLYBDENUM-0.5% TITANIUM, 0.1% ZIRCONIUM ALLOY SHEET AND STRIP 
BMS7-98 		COLUMBIUM - 33 TANTALUM - 1 ZIRCONIUM ALLOY SHEET AND STRIP 
BMS7-99 		MOLYBDENUM - 0.5% TITANIUM - 0.1% ZIRCONIUM ALLOY BAR AND ROUNDS 
BMS7-100		TUBING, HYDRAULIC AM 350 ALLOY COLD REDUCED AND TEMPERED (CRT) CONDITION 
BMS7-101		STEEL-SHEET PLATE AND STRIP (SAE H-11 TYPE) ULTRA HIGH STRENGTH 280-300 KSI 
BMS7-102 	COLUMBIAN - 1 ZIRCONIUM ALLOY SHEET AND STRIP 
BMS7-104 	COLUMBIUM - 10 TITANIUM - 5 ZIRCONIUM ALLOY SHEET 
BMS7-105 	2219 ALUMINUM ALLOY SHEET AND PLATE 
BMS7-107 	CABLE: SINGLE STRAND, NONFLEXIBLE CARBON STEEL (PREFORMED) 
BMS7-108 	ALUMINUM ALLOY FORGED RINGS FOR SPECIAL APPLICATIONS 
BMS7-109 	STEEL SHEET & PLATE ALLOY STRUCTURAL, HIGH STRENGTH GENERAL PURPOSE 
BMS7-110 	ALUMINUM ALLOY SHEET AND PLATE, ALCLAD FOR WELDED AND HEAT TREATED APPLICATIONS (2219) 
BMS7-114 	41.60M STEEL BARS, PLATES, AND FORGING STOCK (BILLETS), ALLOY, FOR SPRINGS 
BMS7-115 	WELD FILLER WIRE, COMMERCIALLY PURE TITANIUM 
BMS7-116 	Cr-Mo-A1 STEEL FOR NITRIDING, BARS, BILLETS, AND FORGING STOCK, VACUUM MELTED 
BMS7-118 	2219 ALUMINUM ALLOY EXTRUSIONS 
BMS7-119 	FORGING, NICKEL-BASE, HEAT RESISTANT TYPE RENE? 41 
BMS7-120 	FORGED BLOCK NICKEL-BASE, HEAT-RESISTANT ALLOY TYPE RENE? 41 
BMS7-121 	2219 ALUMINUM ALLOY DRAWN SEAMLESS TUBE 
BMS7-122 	CONSUMABLE ELECTRODE VACUUM ARC REMELTED 4330 MODIFIED ( AMS 6411 ) STEEL 
BMS7-123 	COLUMBIUM ALLOY TUBING 
BMS7-124 	MOLYBDENUM ALLOY FORGINGS 
BMS7-125 	COLUMBIUM - 10% TITANIUM 5% ZIRCONIUM BAR AND ROUNDS 
BMS7-126 	MOLYBDENUM SEAMLESS TUBING 
BMS7-127 	PLATINUM ALLOY WIRE 
BMS7-128 	BRAZING ALLOY TITANIUM AND ZIRCONIUM BASE 
BMS7-129 	HASTELLOY X FOIL 
BMS7-130 	COLD ROLLED COLUMBIUM - 10 TUNGSTEN - 10 HAFNIUM ALLOY SHEET AND STRIP 
BMS7-131 	2219 ALUMINUM ALLOY FORGINGS 
BMS7-134 	Weld Filler Wire, Corrosion and Heat Resistant Alloys (AISI 3-12) 
BMS7-136 	AGE HARDENABLE NICKEL ALLOY (12.5 Cr-6 Mo-2.6 Ti-34 Fe) SHEET, STRIP AND PLATE (INCOLOY 901) 
BMS7-138 	PALLADIUM FOIL 
BMS7-139 	TUBE, STEEL (CARBON, MECHANICAL; SEAMLESS AND WELDED) 
BMS7-140 	PIPE AND TUBING, HASTELLOY X, COMMERCIAL QUALITY 
BMS7-141 	HEAT RESISTANT BRAZING ALLOYS 
BMS7-143 	TUBING, HASTELLOY "C", SPECIFICATION FOR 
BMS7-144 	ALLOY FORGINGS, NICKEL BASE HEAT RESISTANT, ALLOY TYPE INCONEL 718 
BMS7-145 	4 - 6 INCH THICK 2219 ALUMINUM ALLOY PLATE FOR CRYOGENIC TANKAGE APPLICATION 
BMS7-146 	COLD DRAWN WIRE NICKEL-BASE TYPE RENE' 41 
BMS7-148 	WELD FILLER WIRE, TITANIUM 
BMS7-149 	WELD FILLER WIRE, CORROSION AND HEAT RESISTANT ALLOYS 
BMS7-150 	Weld Filler Wire, Precipitation Hardening Stainless Steels 
BMS7-152 	MAGNESIUM ALLOY ROLL FORGED RINGS 
BMS7-153 	WELD FILLER WIRE, FLUX CORED 
BMS7-154 	WELD, FILLER WIRE LOW-CARBON STEEL 
BMS7-155 	Ti-6A1-4V PRESSURE VESSEL FORGINGS 
BMS7-156 	356 ALUMINUM ALLOY SAND CASTINGS IN THE SOLUTION HEAT TREATED AND AGED, AND SOLUTION HEAT TREATED AND STABIL- IZATION AGED CONDITIONS 
BMS7-157 	355 ALUMINUM ALLOY SAND CASTINGS IN THE SOLUTION HEAT TREATED AND AGED, AND THE SOLUTION HEAT TREATED AND STABILIZATION AGED CONDITIONS 
BMS7-168 	FORGINGS, CORROSION AND HEAT RESISTANT ALLOY, NICKEL BASE 15.5 Cr - 7 Fe- 2.5 Ti -1 (Cb + Ta) - 0.7 A1 (INCONEL X) 
BMS7-171 	FORGINGS, CORROSION AND HEAT RESISTANT ALLOY, NICKEL BASE, 19 Cr - 14 Co -4Mo- 3 Ti - 1.3 Al (Waspaloy) CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 
BMS7-172 	FORGINGS, CORROSION AND HEAT RESISTANT ALLOY STEEL, IRON BASE 16 Cr - 25 Ni - 6 Mo, (16-25-6) 
BMS7-174 	Ti, 6A1-4V, SHEET, STRIP AND PLATE 
BMS7-176 	THIN WALLED FERRITIC DUCTILE IRON CASTINGS 
BMS7-179 	STEEL BARS, FORGINGS AND FORGING STOCK, PREMIUM QUALITY, 4140 
BMS7-180 	7075 ALUMINUM ALLOY EXTRUSIONS, -T73, -T73510 AND -T73511 TEMPER 
BMS7-181 	TITANIUM TI-6AL-4V ALLOY CASTING 
BMS7-182 	STEEL BAR, FORGING STOCK, AND MECHANICAL TUBING: 9Ni-4Co 
BMS7-185 	HYDRAULIC TUBING, CORROSION RESISTANT (21 Cr-6Ni-9Mn) 
BMS7-186 	ALUMINUM ALLOY FORGINGS 
BMS7-187 	NICKEL-BASE ALLOY 22Cr-9Mo-4Nb: SHEET, STRIP AND PLATE 
BMS7-188 	NICKEL-BASE ALLOY, NICKEL ALLOY 625 (UNS N06625), PNEUMATIC DUCTING 
BMS7-189 	BAR & FORGINGS. HEAT & CORROSION RESISTANT ALLOY, IRON BASE, 13 Cr, 8 Ni, 1 Al, 2.25 Mo (Ph 13-8 Mo) 
BMS7-191 	SHEET, STRIP, AND PLATE (21Cr-6Ni-9Mn) 
BMS7-192 	NICKEL BASE ALLOY (22Cr-9Mo-4Nb) RODS, BARS AND FORGING STOCK 
BMS7-193 	NICKEL BASE ALLOY (22Cr-9Mo-4Cb) CASTINGS 
BMS7-194 	HIGH STRENGTH, STRESS CORROSION RESISTANT 7050 ALUMINUM ALLOY PLATE 
BMS7-196 	STRUCTUAL 2024 ALUMINUM ALLOY TUBING 
BMS7-197 	Ti, 6AI-4V, CONTINUOUSLY ROLLED SHEET AND FOIL 
BMS7-198 	DUCTS - ALUMINUM ALLOY 
BMS7-202 	TITANIUM 6AL-4V TUBING FOR STRUCTURAL APPLICATIONS 
BMS7-203 	TI, 3AL-2.5V, SEAMLESS TUBING FOR HYDRAULIC SYSTEMS 
BMS7-207 	ELECTROFORMED NICKEL 
BMS7-209 	PERFORATED METAL SHEET 
BMS7-211 	TITANIUM AND TITANIUM ALLOY FOIL, CONTINUOUSLY ROLLED 
BMS7-213 	BAR, WIRE, TUBING, AND FORGING STOCK HEAT AND CORROSION RESISTANT ALLOY, IRON BASE, 12Cr-9Ni-2Cu-1Ti (12-9-2 STAINLESS STEEL) 
BMS7-214 	HIGH STRENGTH, STRESS CORROSION RESISTANT ALUMINUM ALLOY FORGINGS 
BMS7-218 	WELD FILLER WIRE, TITANIUM AND TITANIUM ALLOYS 
BMS7-223 	CONSUMABLE ELECTRODE VACUUM ARC STEEL BILLETS, BARS AND FORGING-5 CR-1.4 MO 1.35W 
BMS7-224 	TIN-BASE SOLDERING ALLOY 
BMS7-225 	HIGH STRENGTH STEEL AND CORROSION RESISTANT ALLOY EXTRUSIONS 
BMS7-232 	CONDUIT, FLEXIBLE, STAINLESS STEEL 
BMS7-234 	TUBING: TITANIUM 3A1-2.5V SEAMLESS COLD WORKED AND STRESS RELIEVED 
BMS7-240 	15-5PH (UNS S15500) SHEET, PLATE, AND STRIP 
BMS7-243 	PERFORATED METAL SHEET WITH FOROUS METAL OVERLAY 
BMS7-244 	7175 ALUMINUM ALLOY, EXTRUDED BAR, RODS AND SHAPES 
BMS7-245 	TITANIUM ALLOY 6Al-2Sn-4Zr-2Mo BAR FORGING STOCK AND FORGINGS 
BMS7-246 	TITANIUM ALLOY TI-6Al-2Sn-4Zr-2Mo, SHEET, STRIP AND PLATE 
BMS7-247 	TITANIUM 6Al-4V FORGINGS PREMIUM QUALITY 
BMS7-249 	VACCUM ARC REMELTED SAE 9310 STEEL BARS, FORGINGS, AND FORGING STOCK 
BMS7-250 	STEEL BARS AND FORGING STOCK SAE 4340, DOUBLE VACUUM MELTED 
BMS7-251 	PERFORATED TITANIUM SHEET FOR ACOUSTIC APPLICATIONS 
BMS7-254 	ALUMINUM ALLOY PLATE, 2324 
BMS7-255 	ALUMINUM ALLOY EXTRUSIONS, 2224 
BMS7-256 	ALUMINUM ALLOY PLATE, 7150 
BMS7-257 	ALUMINUM ALLOY EXTRUSIONS, 7150-T651X 
BMS7-260 	TITANIUM 10V-2Fe-3AI FORGED BLOCK/BAR AND DIE FORGINGS 
BMS7-261 	ALUMINUM POWDERED METAL ALLOYS, EXTRUDED BAR, ROD AND SHAPES 
BMS7-265 	WIRE ROPE FOR AIRCRAFT CONTROLS-FLEXIBLE 
BMS7-269 	TITANIUM ALLOY 6Al-4V FORGINGS, BETA ANNEALED 
BMS7-270 	ALUMINUM ALLOY ROD AND WIRE, 7050 
BMS7-272 	ALLOY STEEL BAR, FORGING STOCK, AND MECHANICAL TUBING - 1.83 Ni, 0.84 Cr, 2.50 Si, 0.40 Mo, 0.21 V (0.39-0.44C) 
BMS7-274 	FLUX, SOLDERING, LIQUID (ROSIN BASE) TYPE RA 
BMS7-277 	ALUMINUM POWERED METAL ALLOYS, DIE FORGINGS 
BMS7-281 	TITANIUM ALLOY 15V-3Cr-3AI-3Sn STRIP 
BMS7-282 	WELD FILLER WIRE, TWISTED, CARBON STEEL 
BMS7-285 	SOLDER PASTE, TIN-LEAD AND TIN-LEAD SILVER ALLOYS 
BMS7-287 	ALUMINUM-LITHIUM ALLOY 2090 EXTRUSIONS 
BMS7-291 	ALUMINUM-LITHIUM ALLOY 2090 BARE SHEET 
BMS7-302 	HIGH FORMABILITY 7075-0 BARE AND ALCLAD ALUMINUM SHEET 
BMS7-305 	HIGH FORMABILITY 2024-0 ALCLAD ALUMINUM SHEET 
BMS7-306 	HIGH STRENGTH, CORROSION RESISTANT ALUMINUM ALLOY EXTRUSIONS, 7150-T7751X 
BMS7-307 	HIGH STRENGTH 7055 ALUMINUM ALLOY PLATE 
BMS7-308 	HIGH STRENGTH 7055 ALUMINUM ALLOY EXTRUSIONS 
BMS7-310 	TI-6AI-4V HOT ISOSTATIC PRESSED CASTING 
BMS7-312 	HIGH FORMABILITY 6061-0 BARE ALUMINUM SHEET 
BMS7-316 	HIGH TOUGHNESS ALCAD ALUMINUM ALLOY 2XXX SHEET AND PLATE 
BMS7-318 	SUPERPLASTIC FORMABLE 7475 BARE ALUMINUM SHEET 
BMS7-320 	TITANIUM 3Al-8V-6Cr-4Mo-4Z r (BETA C) WIRE AND BAR, COLD DRAWN 
BMS7-323 	HIGH STRENGTH FATIGUE TOLERANT, STRESS CORROSION RESISTANT 7050 ALUMINUM ALLOY PLATE 
BMS7-324 	Ti-15V-3Cr-3Al-3S n HOT ISOSTATIC PRESSED CASTINGS 
BMS7-325 	7050 ALUMINUM ALLOY SHEET (BARE) 
BMS7-326 	ALUMINUM-FIBERGLASS LAMINATE MATERIAL 
BMS7-327 	HIGH TOUGHNESS BARE ALUMINUM ALLOY 2XXX SHEET AND PLATE 
BMS7-328 	TUBING, ALUMINUM, 6061 ALLOY, ROUND, SEAMLESS, DRAWN HYDRAULIC AND PNEUMATIC SYSTEMS 
BMS7-329 	RECRYSTALLIZED ALUMINUM-LITHIUM ALLOY 8090-T3 SHEET 
BMS7-330 	ALUMINUM ALLOY D357.0-T6 CASTING FOR AIRCRAFT STRUCTURAL APPLICATIONS 
BMS7-331 	WELD FILLER WIRE, TITANIUM ALLOY 
BMS7-332 	PH13-8Mo CRES BAR, FORGING STOCK, FORGINGS AND EXTRUSIONS WITH CONTROLLED FRACTURE TOUGHNESS 
BMS7-333 	TITANIUM ALLOY Ti-15V-3Cr-3Al-3Sn-DUCTING, PNEUMATIC SYSTEM DUCTS 
BMS7-334 	TITANIUM ALLOY BETA 21S STRIP AND SHEET 
BMS7-335 	RESIN BONDED LAMINATED SHIM STOCK 
BMS7-336 	Ti-6Al-2Sn-4Zr-2Mo-0.08Si HOT ISOSTATIC PRESSED CASTINGS 
BMS7-337 	COBALT ALLOY 6B, SHEET AND PLATE 
BMS7-338 	COBALT ALLOY 6B, BAR AND BILLET 
BMS7-340 	NICKEL-BASE ALLOY, NICKEL ALLOY 718 (UNS N07718), PNEUMATIC DUCTING 
BMS7-342 	SHOT PEENING MEDIA 
BMS7-343 	TITANIUM ALLOY 15V-3Cr-3Al-3Sn BAR 
BMS7-347 	PREMIUM GRADE TITANIUM ALLOY SHEET, 6Al-4V 
BMS7-348 	THICK SECTION TITANIUM 6AL-4V FORGED BLOCK 
BMS7-349 	BARS, FORGINGS, AND FORGING STOCK VACUUM INDUCTION MELTED - VACUUM ARC REMELTED (VIM - VAR) PH13-8Mo CRES 
BMS7-353 	COPPER-BERYLLIUM ALLOY BARS, RODS, AND MECHANICAL TUBING, 98Cu-1.9B e, (UNS C17200) SOLUTION TREATED ANDAGED 
BMS7-354 	COBALT-NICKEL ALLOY, HIGH STRENGTH, CORROSION AND HEAT RESISTANT WIRE AND BARS, UNS R30159 
BMS7-355 	HIGH STRENGTH FATIGUE AND DAMAGE TOLERANT, STRESS CORROSION RESISTANT 7040 ALUMINUM ALLOY PLATE 
BMS7-357 	XD 15 NW CORROSION RESISTANT STEEL BAR 
BMS7-360 	TITANIUM 5Al-5V-5Mo-3Cr DIE FORGINGS AND BARS 
BMS7-361 	LASER DEPOSITED TI-6AL-4V PREFORMS, STRESS-RELIEVED AND AGED 
BMS7-363 	FORMABLE 2024-T4 BARE AND CLAD SHEET 
BMS7-364 	12Cr-11Ni-1.7Ti-1Mo CORROSION RESISTANT STEEL BAR, WIRE, FORGINGS, AND FORGING STOCK (UNS S46500) 
BMS7-367 	HIGH FORMABILITY DRAWN ALUMINUM TUBING 
BMS7-369 	6AL-4V TITANIUM ALLOY BETA FORGED DIE FORGINGS 
BMS7-370 	ALUMINUM ALLOY FORGINGS, THICK SECTION, HIGH STRENGTH, HIGH FRACTURE TOUGHNESS, STRESS CORROSION RESISTANT 
BMS7-371 	HIGH STRENGTH 7136 ALUMINUM ALLOY EXTRUSIONS 
BMS7-372 	5AL-5V-5Mo-3Cr TITANIUM ALLOY EXTRUSION, BETA ANNEALED, SLOW COOLED AND AGED (BASCA-160) CONDITION 
BMS7-375 	ALUMINUM LITHIUM 2099 T83 ALLOY EXTRUSIONS 
BMS7-380 	TITANIUM 6AL-4V ANNEALED OR CREEP FLATTENED PLATE 
BMS7-381 	HIGH STRENGTH, DAMAGE TOLERANT, CORROSION RESISTANT 7XXX ALUMINUM ALLOY PLATE 
BMS8-2 		GENERAL PURPOSE, RIGID, FIRE RETARDED GLASS FABRIC REINFORCED PLASTIC SHEETING 
BMS8-3 		LAMINATED SIGHTING DOMES 
BMS8-4 		FLAT LAMINATED ACRYLIC SHEET 
BMS8-5 		LAMINATED PLASTIC AIR DUCTS 
BMS8-6 		FLEXIBLE AND SEMI-RIGID LAMINATED FABRIC AIRDUCTS 
BMS8-7 		VAPOR-PERMEABLE NEOPRENE-COATED NYLON 
BMS8-8 		HIGH TEMPERATURE AIR DUCT INSULATION 
BMS8-9 		NON SELF-SEALING FUEL CELL BACKING BOARD 
BMS8-10		PLASTIC TUBING FOR WATER LINES 
BMS8-11 		LAMINATED PLASTIC SHEET - POST FORMING GRADE 
BMS8-12 		RIGID LOW-PRESSURE LAMINATED PLASTIC SHEET 
BMS8-13 		BACKING BOARD FOR FUEL CELL SUPPORT 
BMS8-14 		B-47 CANOPY 
BMS8-15 		LIQUID AROMATIC POLYAMINE HARDENER FOR EPOXY RESINS 
BMS8-16 		LIQUID EPOXY RESIN, MEDIUM VISCOSITY 
BMS8-17 		FLEXIBLE & SEMIRIGID AIR DUCTS, AND FLEXIBLE COUPLING FOR RIGID DUCTS 
BMS8-18 		FLAME RETARDANT TREATED COTTON FABRIC 
BMS8-19 		SPECIFICATION FOR FABRIC, IMPREGNATED LIGHT WEIGHT, HIGH STRENGTH, SYNTHETIC FIBER 
BMS8-20 		LAMINATED PLASTIC SHEET, METAL CLAD 
BMS8-24 		SILICONE RUBBER COATED GLASS FABRIC 
BMS8-25 		VINYL, LAMINATED FOR INTERIOR OF COMMERCIAL AIRCRAFT 
BMS8-26 		NON-SELF SEALING FUEL CELL FLEXIBLE BACKING BOARD 
BMS8-27 		SYNTHETIC FABRIC VAPOR PERMEABLE 
BMS8-28 		AIRCRAFT FLOOR COVERING 
BMS8-29 		LIQUID METHYL NADIC ANHYDRIDE CURING AGENT FOR EPOXY RESINS 
BMS8-30 		STRUCTURAL FOAM-IN-PLACE ADHESIVE 
BMS8-31 		PARACHUTE PACK NYLON WATER REPELLENT TREATED 
BMS8-32 		METAL CLAD FLEXIBLE LAMINATE 
BMS8-33 		SYNTHETIC FABRIC, FLAME RESISTANT, COATED 
BMS8-34 		STRETCHED ACRYLIC PLASTICS 
BMS8-35 		STYRENE COPOLYMER SHEET 
BMS8-36 		AIRCRAFT CARPET AND UNDERLAY MATERIALS 
BMS8-37 		ACOUSTICAL INSULATION - FLEXIBLE POLYURETHANE FOAM 
BMS8-38 		FOAM-URETHANE, RIGID FLUOROCARBON-BLOWN 
BMS8-39 		FLEXIBLE URETHANE FOAM 
BMS8-40 		FLEXIBLE POTTING COMPOUNDS, ELECTRICAL 
BMS8-41 		EPOXY COMPOUNDS FOR THE EMBEDMENT OF ELECTRICAL AND ELECTRONIC COMPONENTS 
BMS8-42 		VIBRIN 135 (TRIALLYL CYANURATE MODIFIED) POLYESTER RESIN 
BMS8-43 		REINFORCED PLASTIC SHEEING FOR SANDWICH CONSTRUCTION 
BMS8-44 		POLYVINYL CHLORIDE PLASTISOLS, CAST AND MOLDED 
BMS8-45 		TAMPER-PROOF PUTTY 
BMS8-46 		PRE-IMPREGNATED REINFORCEMENTS, POLYESTER, FIRE RESISTANT, GENERAL PURPOSE 
BMS8-47 		COATED FABRIC, HIGH MASS, FLEXIBLE 
BMS8-48 		THERMAL-ACOUSTICAL FIBERGLASS INSULATION 
BMS8-49 		FIRE RESISTANT, POLYESTER REIN PREIMPREGNATED OPEN WEAVE GLASS FABRIC FOR GENERAL PURPOSE USE 
BMS8-50 		MOLDED THERMAL INSULATION FOR MISSILE APPLICATION 
BMS8-51 		SHOCK ABSORBING FLEXIBLE POLYETHER URETHANE FOAM 
BMS8-52 		STRUCTURAL LOW PRESSURE LAMINATED EPOXY SHEETING, AND PARTS, SELF-EXTINGUISHING 
BMS8-53 		LAMINATED THERMOSETTING PLASTIC SHEETING, PAPER BASE 
BMS8-54 		GLASS FABRIC, PREIMPREGNATED, SELF- EXTINGUISHING EPOXY 
BMS8-55 		COATED SYNTHETIC FABRIC 
BMS8-56 		RIGID URETHANE FOAM AIR DUCTS 
BMS8-57 		GLASS FIBER-REINFORCED FIRE RESISTANT PLASTIC AIR DUCTS 
BMS8-58 		HIGH TEMPERATURE RESISTANT PHENOLIC RESIN PREIMPREGNATED GLASS FABRIC 
BMS8-59 		AIRCRAFT DRAPERY AND CURTAIN MATERIALS - SELF EXTINGUISHING 
BMS8-60 		AIRCRAFT UPHOLSTERY FABRICS, SELF-EXTINGUISHING 
BMS8-61 		FOAM - URETHANE, FLEXIBLE 
BMS8-62 		DECORATIVE VINYL COATED FABRICS - SELF-EXTINGUISHING 
BMS8-63 		FOAM-URETHANE, RIGID CLOSED CELL, FOAM-IN-PLACE 
BMS8-64 		FABRIC, FLOW RESISTANT, ACOUSTIC 
BMS8-65 		T.A.C. MODIFIED POLYESTER LAMINATING RESIN AND T.A.C. MODIFIED POLYESTER IMPREGNATED GLASS FABRIC 
BMS8-66 		GLASS, MONOLITHIC AND LAMINATED AIRCRAFT GLAZING ASSEMBLIES 
BMS8-67 		GLASS FABRIC PREIMPREGNATED, AUTOCLAVE MOLDING GRADE 
BMS8-68 		HIGH TEMPERATURE (400 F), FLEXIBLE, ELECTRICAL SEALING AND POTTING COMPOUND 
BMS8-69 		ISULATIVE COATING COMPOUND FOR ELECTRONIC ASSEMBLIES 
BMS8-70 		RESIN BONDED CORK ABLATIVE INSULATION MATERIAL 
BMS8-71 		TFE - FLUOROCARBON RESIN MOLDING AND EXTRUSION MATERIALS 
BMS8-72 		THERMOSETTING REINFORCED PHENOLIC RESIN MOLDING COMPOUND 
BMS8-73 		FOAM, CLOSED CELL (FOAM-IN-PLACE) 
BMS8-74 		GLASS FABRIC, PREIMPREGNATED, SELF-EXTINGUISHING EPOXY RESIN 
BMS8-75 		FLEXIBLE CABLE MOLDING COMPOUND 
BMS8-76 		POLYVINYL CHLORIDE CABLE JACKETING 
BMS8-77 		GLASS FILLED POLYAMIDE (NYLON) MOLDING COMPOUND AND PARTS 
BMS8-78 		EPOXY POLYAMIDE ABLATIVE, INSULATION MATERIAL 
BMS8-79 		GLASS FABRIC PREIMPREGNATED EPOXY RESIN LOW TEMPERATURE CURING 
BMS8-80 		FIRE RESISTANT, POLYESTER RESIN PREIMPREGNATED GLASS FABRICS FOR GENERAL PURPOSE USE 
BMS8-81 		POLYURETHANE POTTING - MOLDING COMPOUND, ELECTRIC CABLE 
BMS8-83 		FLEXIBLE, PLASTIC HOSE 
BMS8-84 		FORMED THERMAL-ACOUSTICAL INSULATION 
BMS8-85 		GLASS FABRIC HONEYCOMB CORE 
BMS8-86 		PLASTIC, ABS SHEET, FLAME RESISTANT 
BMS8-87 		AIRCRAFT UPHOLSTERY LEATHER, GENUINE AND ARTIFICIAL 
BMS8-89 		POLYVINYL CHLORIDE, POLYVINYL FLUORIDE AND POLYETHYLENE TEREPHTHALATE LAMINATES AND POLYVINYL CHLORIDE UNSUPPORTED SHEET 
BMS8-90 		MICROWAVE DIELECTRIC MATERIAL 
BMS8-91 		POLYESTER-ALUMINUM LAMINATE TAPE 
BMS8-92 		FLEXIBLE, FUEL RESISTANT ELECTRICAL POTTING COMPOUND 
BMS8-95 		FABRIC , FLAME RESISTANT , HYPALON COATED 
BMS8-96 		FOAM - RIGID POLYURETHANE 
BMS8-98 		POLYVINYL FLUORIDE FILM 
BMS8-99 		PLASTIC, ABS SHEET, FOR ELECTRONIC USAGE 
BMS8-100		RIGID, HIGH IMPACT-FIRE RESISTANT GLASS REINFORCED EPOXY SHEETING 
BMS8-101 	ADHESIVE FILM FOR GLASS FABRIC REINFORCED PLASTIC SANDWICH ASSEMBLIES 
BMS8-103 	TROWELABLE CORK, ABLATIVE INSULATION MATERIAL 
BMS8-104 	AIR DUCT INSULATION, NONCORROSIVE TO STAINLESS STEEL 
BMS8-106 	REINFORCED POLYTETRAFLUOROETHYLENE (TFE) 
BMS8-109 	POLYURETHANE DIELECTRIC ENCAPSULANTS 
BMS8-110 	PLASTIC SHEET, LAMINATED, THERMO-SETTING, PAPER BASE, PHENOLIC-RESIN COMMERICAL QUALITY 
BMS8-113 	STRUCTURAL POLYURETHANE FOAM 
BMS8-114 	Glass Roving Reinforced Epoxy Resin Panels 
BMS8-115 	POLYMER COATED FABRIC - FLAME RESISTANT 
BMS8-116 	EMBEDDING COMPOUND FOR ELECTRONIC ASSEMBLIES 
BMS8-117 	GLASS FABRIC PREIMPREGNATED, EPOXY RESIN 
BMS8-118 	GLASS FABRIC, PREIMPREGNATED, B-STAGED EPOXY RESIN FOR ELECTRONIC LAMINATES 
BMS8-120 	LAMINATED, COPPER CLAD GLASS EPOXY (FOR PRINTED-WIRING BOARDS) 
BMS8-121 	POLYTETRAFLUORETHYLENE PARTS AND STOCK SHAPES 
BMS8-122 	HONEYCOMB CORE-SPLICING FOAM MATERIAL 
BMS8-124 	NONMETALLIC HONEYCOMB CORE 
BMS8-125 	REINFORCED PLASTICS HONEYCOMB CORE FOR CONTINUOUS ELEVATED TEMPERATURE SERVICE 
BMS8-126 	POLYIMIDE STRUCTURAL FOAM FOR ELEVATED TEMPERATURE (400-500F) SERVICE 
BMS8-129 	HIGH TEMPERATURE PHENOLIC RESIN PREIMPREGNATED GLASS FABRIC 
BMS8-132 	FIRE RESISTANT EPOXY RESIN PREIMPREGNATED GLASS FABRICS FOR GENERAL PURPOSE USE 
BMS8-133 	FLAME RETARDANT RIGID URETHANE FOAMS 
BMS8-135 	POLYCARBONATE MOLDING COMPOUNDS, STOCK AND MOLDED SHAPES 
BMS8-137 	FLEXIBLE POLYVINYL CHLORIDE EXTRUSIONS AND MOLDED PARTS 
BMS8-139 	GLASS FABRIC PREIMPREGNATED HIGH-TEMPERATURE-RESISTANCE EPOXY RESIN 
BMS8-141 	AIRCRAFT CABIN WINDOW SHADE MATERIALS 
BMS8-142 	INSULATION COVERING, SELF-EXTINGUISHING 
BMS8-143 	EPOXY PREIMPREGNATED ARAMID PAPER AND GLASS FABRIC FOR INTERIOR DECORATIVE LAMINATES 
BMS8-144 	POLYIMIDE RESIN IMPREGNATED STRUCTURAL FIBERGLASS FABRIC 
BMS8-145 	HIGH TEMPERATURE RESISTANT EPOXY ADHESIVE FILM GLASS FABRIC REINFORCED PLASTIC SANDWICH ASSEMBLIES 
BMS8-150 	RIGID PVC FOAM CORE 
BMS8-151 	EPOXY PREIMPREGNATED GLASS FABRIC FOR INTERIOR SANDWICH PANELS AND LAMINATES, AND ELECTRICAL ISOLATION 
BMS8-154 	HIGH STRENGTH GLASS FABRIC PREIMPREGNATED, HIGH TEMPERATURE RESISTANT, EPOXY RESIN 
BMS8-163 	RESIN, POLYESTER, LOW PRESSURE MOLING, SELF-EXTINGUISHING 
BMS8-164 	EPOXY RESIN PREIMPREGNATED NONWOVEN S-GLASS FIBER MATERIALS 
BMS8-168 	EPOXY PREIMPREGNATED CARBON FIBER TAPES AND WOVEN FABRICS - 250F (121C) CURE 
BMS8-169 	GLASS FABRIC PREIMPREGNATED EPOXY RESIN, VACUUM BAG PROCESS 
BMS8-175 	ACRYLIC-POLYVINYLCHLORIDE SHEETS 
BMS8-176 	RESIN FILMS FOR BACKCOATING TEXTILES 
BMS8-177 	GLASS FABRIC REINFORCEMENT FOR HIGH STRENGTH PLASTIC LAMINATE PRODUCTS 
BMS8-178 	FOAM SANDWICH COMPOSITE FOR USE IN CARGO LINER APPLICATIONS 
BMS8-185 	RIGID GLASS FIBER REINFORCED PLASTIC LAMINATE, ABRASIVE RESISTANT SURFACE ONE SIDE 
BMS8-187 	SYNTACTIC FOAM, EPOXY COATED - HOLLOW GLASS MICROSPHERES, FOR ELECTRONIC APPLICATIONS 
BMS8-190 	HIGH THERMAL CONDUCTIVITY EPOXY COMPOUNDS FOR THE EMBEDMENT OF ELECTRICAL AND ELECTRONIC COMPONENTS 
BMS8-191 	HIGH MODULUS EPOXY RESIN SYSTEM 
BMS8-192 	NONMETALLIC HONEYCOMB-GLASS FABRIC REINFORCED - MIRCO CELL SIZE 
BMS8-193 	AUXILIARY RESINS FOR USE WITH SINGLE STAGE SANDWICH PANELS 
BMS8-195 	HIGH TEMPERATURE RESISTANT ADHESIVE FILM FOR GLASS FABRIC REINFORCED PLASTIC SANDWICH ASSEMBLIES FOR ELECTRICAL APPLICATIONS 
BMS8-196 	EPOXY RESIN PREIMPREGNATED NON-WOVEN E-GLASS FIBER MATERIALS 
BMS8-197 	SHEET MOLDING COMPOUND, POLYESTER FIBERGLASS, SELF EXTINGUISHING 
BMS8-199 	MAT, FIBROUS GLASS 
BMS8-201 	FIBERGLASS RESIN 
BMS8-202 	EPOXY-UNIDIRECTIONAL GLASS LAMINATES 
BMS8-203 	EPOXY PRE-IMPREGNATED UNIDIRECTIONAL GRAPHITE 
BMS8-205 	POLYETHER-POLYURETHANE INJECTION MOLDING MATERIAL FOR ELECTRIC CABLE 
BMS8-206 	GLASS FABRIC REINFORCED EPOXY PREPREG FOR HIGH PRESSURE MOLDED LAMINATES 
BMS8-207 	RESIN, SEALING AND POTTING, FOR FLAME SPRAY APPLICATION 
BMS8-208 	EPOXY PREIMPREGNATED GLASS FABRIC - OVEN CURED 
BMS8-209 	POLYVINYLIDENE CHLORIDE EMULSION 
BMS8-212 	EPOXY PREIMPREGNATED CARBON FIBER TAPES AND WOVEN FABRICS - 350 F (177C) CURE 
BMS8-213 	HARDENER, AROMATIC POLYAMINE FOR EPOXY RESINS 
BMS8-214 	RESIN, EPOXY MEDIUM VISCOSITY 
BMS8-215 	EPOXY RESIN PREIMPREGNATED NONWOVEN GRAPHITE FIBERS 
BMS8-216 	EPOXY RESIN PREIMPREGNATED NON-WOVEN HIGH MODULUS GRAPHITE FIBERS 
BMS8-218 	ARAMID FABRICS PREIMPREGNATED WITH EPOXY RESIN (350 F CURING) 
BMS8-219 	ARAMID FABRICS PREIMPREGNATED WITH EPOXY RESIN (250F CURING) 
BMS8-221 	POLYETHERSULFONE THERMOPLASTIC, SHEET, INJECTION AND EXTRUSION RESINS AND EXTRUDED PROFILE SHAPES 
BMS8-222 	MODIFIED PHENOLIC PREIMPREGNATED GLASS FABRIC FOR AIRCRAFT INTERIOR SANDWICH PANELS 
BMS8-223 	CARGO LINER, GLASS REINFORCED, PHENOLIC RIGID, HIGH IMPACT, FIRE RESISTANT 
BMS8-224 	GLASS FABRICS, RESIN IMPREGNATED, FIRE RESISTANT FOR GENERAL PURPOSE USE 
BMS8-225 	POLYESTER SHEET MOLDING COMPOUND 
BMS8-226 	MODIFIED PHENOLIC PREIMPREGNATED GLASS FABRIC FOR INTERIOR SANDWICH PANEL AND LAMINATES 
BMS8-236 	FLATWEAVE FABRIC UPHOLSTERY 
BMS8-237 	CARPET 
BMS8-240 	DRAPERY AND CURTAIN MATERIAL 
BMS8-242 	NEEDLED FELT 
BMS8-245 	ADHESIVE FOR COMPOSITE BONDING (350F CURE) 
BMS8-246 	COATED, TRANSPARENT POLYCARBONATE MATERIALS 
BMS8-247 	GRAPHITE FIBER PREIMPREGNATED WITH EPOXY RESIN, UNDIRECTIONAL TAPE 350 DEG F CURE 
BMS8-250 	FABRIC, SILICONE COATED, FOR FLEXIBLE AIRDUCTS 
BMS8-251 	POLYCARBONATE THERMOPLASTIC SHEET, INJECTION MOLDING, EXTRUSION AND ROTOMOLDING RESIN 
BMS8-253 	POLYSULFONE THERMOPLASTIC, SHEET, AND INJECTION, EXTRUSION AND ROTOMOLDING RESIN 
BMS8-254 	TEXTURE RETENTION MATERIALS FOR FLEXIBLE DECORATIVE LAMINATES 
BMS8-255 	SILICONE DIELECTRIC ENCAPSULANTS 
BMS8-256 	EPOXY PREIMPREGNATED CARBON FIBER TAPES AND WOVEN FABRICS - 350 F (177 C CURE) 
BMS8-258 	EPOXY IMPREGNATED GRAPHITE WOVEN FABRICS - 275 F (135 C) CURE VACUUM BAG PROCESS 
BMS8-260 	ARAMID FABRICS, EPOXY RESIN IMPREGNATED, FOR INTERIOR SANDWICH PANELS AND LAMINATES 
BMS8-262 	CARGO LINER, "KEVLAR" REINFORCED THERMOSET 
BMS8-263 	KEVLAR* FABRIC, EPOXY RESIN IMPREGNATED, FOR INTERIOR DECORATIVE LAMINATES 
BMS8-264 	ARAMID FABRICS PREIMPREGNATED WITH EPOXY RESIN FOR VACUUM BAG PROCESS 
BMS8-267 	FORMABLE TEDLAR DECORATIVE ALUMINUM LAMINATE 
BMS8-268 	TEDLAR/THERMOPLASTIC SHEET LAMINATE 
BMS8-269 	POLYAMIDE-IMIDE THERMOPLASTIC, INJECTION MOLDING AND EXTRUSION RESINS 
BMS8-270 	POLYAMIDE (NYLON) INJECTION MOLDING AND ROTOMOLDING RESINS FOR INTERIOR APPLICATIONS 
BMS8-271 	SHEET MOLDING COMPOUND, PHENOLIC FIBERGLASS 
BMS8-273 	KEVLAR/PHENOLIC PREPREGS FOR INTERIOR CRUSHED CORE SANDWICH PANELS 
BMS8-274 	CARBON FIBER/PHENOLIC PREPREG FOR INTERIOR SANDWICH PANELS 
BMS8-276 	ADVANCED COMPOSITES - 350 F CURE TOUGHENED - EPOXY PREIMPREGNATED CARBON FIBER TAPES AND FABRICS 
BMS8-278 	ALUMINUM COATED GLASS FIBER CLOTH EPOXY RESIN PREIMPREGNATED 
BMS8-283 	FLEXIBLE FOAM SOUND DAMPING AND SEALING TAPE 
BMS8-285 	TEXTILE HOOK AND LOOP FASTENERS 
BMS8-286 	AIRCRAFT FLOOR MATS 
BMS8-289 	ALUMINUM FOIL/FABRIC PREPREG OR ADHESIVE FILM LAMINATE MATERIAL 
BMS8-293 	POLYETHERIMIDE BASED THERMOPLASTIC SHEET, INJECTION, EXTRUSION AND ROTOMOLDING 
BMS8-294 	EPOXY IMPREGNATED CARBON FIBER TAPES AND WOVEN FABRICS SUITABLE FOR LAMINATE STRUCTURE 
BMS8-297 	EPOXY PREIMPREGNATED CARBON TAPE AND WOVEN FABRIC FOR AIRCRAFT STRUCTURE, 350 F CURE 
BMS8-297-1 	EPOXY PREIMPREGNATED CARBON FIBER REINFORCEMENTS FOR STRUCTURAL PULTRUSIONS - 350 F (177 C) CURE 
BMS8-297-2 	EPOXY PREIMPREGNATED BIAS WOVEN CARBON REINFORCEMENT FOR USE ON AUTOMATED LAMINATING MACHINES 
BMS8-297-3 	EPOXY IMPREGNATED CARBON TAPE FOR AUTOMATED MACHINES - 350F (177C) CURE 
BMS8-297-4 	EPOXY RESIN - 350F CURE 
BMS8-297-5 	EPOXY PREIMPREGNATED WOVEN CARBON REINFORCEMENT FOR USE ON PULTRUSION 
BMS8-299 	URETHANE COMPOUNDS FOR THE EMBEDMENT OF ELECTRICAL AND ELECTRONIC COMPONENTS 
BMS8-300 	FLEXIBLE POLYIMIDE FOAM 
BMS8-301 	COMPOSITE STRUCTURAL REPAIR RESINGS TWO PARTS 
BMS8-302 	RANDOM CARBON FIBER MAT - DRY MAT AND IMPREGNATED WITH 250 F AND 350 F CURE EPOXY 
BMS8-303 	CONDUCTIVE CARBON FIBER FABRIC/EPOXY - 350 F CURE 
BMS8-304 	CONDUCTIVE CARBON FIBER, FABRIC/EPOXY, 250 F CURE 
BMS8-305 	SINGLE COMPONENT SILICONE DIELECRIC ENCAPSULANT 
BMS8-306 	BISMALEIMIDE ROVING FOR FILAMENT WINDING 
BMS8-307 	PEEK RESIN IMPREGNATED GRAPHITE TAPE 
BMS8-308 	PEEL PLY MATERIALS FOR SURFACE PREPARATION OF COMPOSITES 
BMS8-310 	NONWOVEN PREIMPREGNATED WITH EPOXY RESIN (250F CURING) 
BMS8-317 	POLYETHER ETHER KETONE (PEEK) THERMOPLASTIC INJECTION MOLDING RESIN 
BMS8-318 	POLYURETHANE THERMOPLASTIC EXTRUSION AND INJECTION MOLDING RESIN 
BMS8-319 	POLYETHERKETONEKETONE (PEKK) THERMOPLASTIC 
BMS8-320 	POLYVINYL FLUORIDE FILM/THERMOPLASTIC SHEET LAMINATE - MEETS 1990 HEAT RELEASE AND SMOKE EMISSION REQUIREMENTS FOR CABIN INTERIOR MATERIALS 
BMS8-321 	POLYETHERIMIDE BASED THERMOPLASTIC INJECTION MOLDING AND PROFILE EXTRUSION RESIN FOR CABIN INTERIOR APPLICATIONS 
BMS8-322 	EPOXY COMPOUNDS FOR THE EMBEDMENT OF MAGNETIC DEVICES 
BMS8-323 	POLYAMIDE (NYLON) INJECTION MOLDING AND EXTRUSION RESINS FOR EXTERIOR APPLICATIONS 
BMS8-324 	SYNTACTIC CORE 
BMS8-325 	LAMINATED, COPPER CLAD RESIN IMPREGNATED (FOR PRINTED-WIRING BOARDS) 
BMS8-327 	EPOXY SHEET MOLDING COMPOUND 
BMS8-328 	POLYPHENYLSULFONE BASED THERMOPLASTIC 
BMS8-330 	FLEXIBLE, HIGH TEMPERATURE INSULATION BLANKETS 
BMS8-331 	ADVANCED COMPOSITES - 350 F CURE EPOXY PREIMPREGNATED FIBERGLASS FABRICS 
BMS8-336 	EXPANDED METAL FOIL FOR LIGHTNING STRIKE PROTECTION OF COMPOSITE PARTS 
BMS8-338 	MOLDABLE PLASTIC SHIM 
BMS8-339 	THERMALLY CONDUCTIVE NONMETALLIC CARBON FIBER HONEYCOMB CORE 
BMS8-341 	SURFACING FILMS FOR COMPOSITES 
BMS8-342 	CARBON FIBER-REINFORCED PLASTIC (CFRP) HONEYCOMB CORE 
BMS8-343 	POLYMER COATED FABRIC, FLAME RESISTANT, FLEXIBLE CARGO LINER 
BMS8-344 	EPOXY MATERIAL SYSTEMS FOR RESIN TRANSFER MOLDED COMPOSITE PARTS 
BMS8-346 	MOISTURE BARRIER TAPE 
BMS8-347 	INSULATION BLANKETS WITH POLYIMIDE FILM FACINGS FOR HIGH TEMPERATURE USE 
BMS8-349 	FLEXIBLE HIGH TEMPERATURE INSULATION BLANKETS WITH WOVEN FABRIC COVERING 
BMS8-350 	INTEGRAL SKINNING FLEXIBLE URETHANE FOAM AND PAINT FOR MOLDED PRODUCTS 
BMS8-352 	MODIFIED SILICONE PREIMPREGNATED FABRIC 
BMS8-353 	REINFORCED THERMOPLASTIC LAMINATE 
BMS8-356 	POLYVINYLIDENE FLUORIDE (PVDF BASED FILM) 
BMS8-358 	THERMOPLASTIC FOAMS 
BMS8-360 	ADVANCED INSULATION COVERING, SELF-EXTINGUISHING 
BMS8-363 	PREPREGS FOR HIGH TEMPERATURE APPLICATIONS 
BMS8-370 	ADVANCED POLYMER COATED FABRIC - FLAME RESISTANT 
BMS8-371 	FLEXIBLE POLYVINYLIDENE FLUORIDE FOAM 
BMS8-372 	TEXTILE HOOK AND LOOP FASTENERS, FLAME PROPAGATION RESISTANT 
BMS8-373 	NEEDLED FELT, FLAME PROPAGATION RESISTANT 
BMS8-374 	COATED FABRIC, HIGH MASS, FLAME PROPAGATION RESISTANT 
BMS8-375 	EPOXY PREIMPREGNATED CARBON FIBER TAPE AND WOVEN FABRIC - 350 F (177 C) CURE-SELF ADHESIVE FOR HONEYCOMB STRUCTURE 
BMS8-377 	INSULATION COVERING, FLAME PROPAGATION RESISTANT 
BMS9-1  		HIGH TEMPERATURE MINERAL FIBER INSULATION 
BMS9-2 		FIBER GLASS PAPER FOR CRYOGENIC INSULATION 
BMS9-3 		GLASS FABRIC REINFORCEMENTS FOR LAMINATED PLASTIC PRODUCTS 
BMS9-8 		CARBON FIBER REINFORCEMENTS, YARN AND FABRIC 
BMS9-9 		CARBON REINFORCEMENTS, HIGH STRAIN FIBERS 
BMS9-11		CARBON REINFORCEMENTS, BIAS WOVEN AND PLAIN WEAVE 
BMS9-12 		CONDUCTIVE CARBON FIBER REINFORCEMENT - YARN AND FABRIC 
BMS9-16 		BIAS CARBON FIBER FABRIC 
BMS9-17 		CARBON REINFORCEMENTS, HIGH STRENGTH AND INTERMEDIATE MODULUS FIBERS AND FABRICS 
BMS9-19 		CERAMIC FELT INSULATION 
BMS9-20 		INSULATION, HIGH TEMPERATURE LOW THERMAL CONDUCTIVITY 
BMS9-22 		FIBERS FOR RESIN INFUSED COMPOSITES 
BMS9-223		BRAIDED PREFORMS 
BMS10-1 		AROMATIC FUEL RESISTANT PRIMER-SEALER 
BMS10-2 		COPPER PLATE 
BMS10-3 		DECALCOMANIAS 
BMS10-4 		EXTERIOR ALKYD ENAMELS 
BMS10-5 		FAST-DRY SEMI-GLOSS FINISH 
BMS10-6 		ALUMINUM HARD COATING 
BMS10-8 		PORCELAIN ENAMEL MARKINGS ON ALUMINUM ALLOYS 
BMS10-9 		THINNER, ZINC CHROMATE PRIMER 
BMS10-10		SCREEN-APPLIED MASKING MATERIALS 
BMS10-11 	CHEMICAL AND SOLVENT RESISTANT FINISH 
BMS10-13 	PRIMER, ZINC CHROMATE, IN AEROSOL SPRAY APPLICATOR 
BMS10-14 	CHEMICALLY MILLED ALUMINUM ALLOY SURFACES 
BMS10-15 	LIGHT UNDERCOATING FINISH SYSTEM (B-52 AIRCRAFT) 
BMS10-16 	BATTERY ELECTROLYTE RESISTANT FINISH (AIR DRYING) 
BMS10-17 	ALKALINE REMOVABLE EXTERIOR PROTECTIVE COATING 
BMS10-18 	PRIMER, SYNTHETIC FLUID RESISTANT FINISH 
BMS10-19 	PEELABLE TEMPORARY PROTECTIVE COATINGS (INDOOR) 
BMS10-20 	CORROSION RESISTANT FINISH FOR INTEGRAL FUEL TANKS 
BMS10-21 	ANTI-STATIC COATINGS 
BMS10-22 	LUSTERLESS EPOXY FINISHES 
BMS10-23 	ENAMEL, QUICK DRYING 
BMS10-24 	CERAMIC PROTECTIVE COATING FOR HEAT TREATMENT OF TITANIUM ALLOYS 
BMS10-26 	PLASTIC FILM FOR MARKERS 
BMS10-27 	CORROSION PROTECTIVE COATING FOR INTERNAL FUEL TANKS 
BMS10-28 	HOT MELT STRIPPABLE COATINGS FOR SPECIAL USE 
BMS10-29 	FLUORESCENT PROTECTIVE COATING FOR ELECTRONIC COMPONENTS 
BMS10-30 	FLUID RESISTANT DECALS 
BMS10-31 	CHEMICALLY MILLED TITANIUM PARTS 
BMS10-32 	COLOR CHANGING PAINT 
BMS10-33 	CERAMIC HOT FORMING LUBRICANT 
BMS10-34 	LEAK-DETECTING SYSTEMS 
BMS10-35 	SEMI-GLOSS EPOXY FINISH 
BMS10-36 	NICKEL PLATING (ELECTRODEPOSITED) 
BMS10-37 	MASKANTS FOR CHEMICAL MILLING 
BMS10-38 	SOLVENT FOR HOT SPRAY APPLICATION OF MIL-S-4383 MATERIAL 
BMS10-39 	FUEL AND MOSITURE RESISTANT FINISH FOR FUEL TANKS 
BMS10-40 	CHEMICALLY MILLED STEEL PARTS 
BMS10-41 	ELECTROLESS NICKEL PLATING 
BMS10-43 	PRIMER COATING, QUICK DRYING 
BMS10-48 	ELECTROCHEMICALLY MACHINED FERROUS ALLOYS 
BMS10-49 	CHEMCIALLY MILLED MAGNESIUM PARTS 
BMS10-50 	ELECTROLESS NICKEL ON ALUMINUM 
BMS10-51 	CHLOROSULFONATED POLYETHYLENE COATING 
BMS10-52 	LIMITED OUTDOOR STRIPPABLE TEMPORARY PROTECTIVE COATINGS 
BMS10-53 	HIGH TEMPERATURE PRIMER 
BMS10-54 	DIELECTRIC SCREENING INKS 
BMS10-55 	INTERIOR DECORATIVE WATER EMULSION PAINTS 
BMS10-60 	PROTECTIVE ENAMEL 
BMS10-61 	VINYL LACQUER, LOW PIGMENT GLOSS BLACK 
BMS10-67 	THERMAL SPRAY POWDERS 
BMS10-68 	WELD-THROUGH PRIMER 
BMS10-70 	THIN, DENSE CHROMIUM PLATING 
BMS10-72 	EXTERIOR DECORATIVE PAINT SYSTEM 
BMS10-73 	SCREEN PRINTING INKS 
BMS10-78 	CLEAR BAKING ENAMEL 
BMS10-79 	URETHANE COMPATIBLE, CORROSION RESISTANT PRIMER 
BMS10-82 	LOW EMISSIVITY GOLD COATING 
BMS10-83 	INTERIOR DECORATIVE URETHANE PAINT SYSTEM 
BMS10-85 	ALUMINUM PIGMENTED COATING FOR FASTENERS 
BMS10-86 	TEFLON FILLED COATING 
BMS10-90 	THERMAL CONTROL COATING 
BMS10-94 	MASKS, SOLDERING 
BMS10-97 	URETHANE EXTERIOR COATINGS 
BMS10-98 	COLORED ANODIZED ALUMINUM FOR MANUFACTURE OF MARKERS 
BMS10-100 	FLEXIBLE CORROSION INHIBITING COATINGS 
BMS10-101 	URETHANE COATINGS FOR INTEGRAL FUEL TANKS 
BMS10-102 	FIRE RESISTANT INSULATIVE COATING SYSTEM 
BMS10-103 	NONCHROMATED PRIMER FOR COMPOSITES 
BMS10-107 	WATER BASED SCREEN PRINTING INKS 
BMS10-108 	MARKING TAPES AND ADHESIVE LABELS 
BMS10-109 	MARKING INKS, PAINTS, AND COATINGS 
BMS10-110 	INTERIOR DECORATIVE HEAT CURED POWDER COATING 
BMS10-112 	INORGANIC THERMAL CONTROL COATING 
BMS10-115 	PRESS-ON WALKWAY FILM FOR FLOOR PANELS 
BMS10-117 	FLAME RETARDANT COATING FOR INTERIORS 
BMS10-123 	NON-CHROMATED INTEGRAL FUEL TANK COATING FOR COMPOSITE, TITANIUM AND CRES SURFACES 
BMS11-1 		CLEANER, ALKALINE (PHOSPHO-SILICATE) 
BMS11-4 		CLEANER, EMULSION TYPE (CONCENTRATE) 
BMS11-5 		CLEANING SOLVENT, TWO STAGE 
BMS11-6 		TRICHLOROETHYLENE 
BMS11-7 		CLEANING SOLVENT, PRE-SEALING 
BMS11-8 		EMULSION CLEANER, SOLVENT-ALKALINE TYPE 
BMS11-9 		METHYL PROPYL KETONE 
BMS11-10		STABILIZED LIMONENE CLEANER 
BMS11-11 	N-PROPYL BROMIDE (NPB) SOLVENT 
BMS13-1 		WIRE, ELECTRIC, INSULATED, COPPER 300-VOLT, 257F CONDUCTOR TEMP. 
BMS13-2 		CABLE, ELECTRIC-HIGH TEMPERATURE - 125 C 
BMS13-3 		WIRE: ELECTRICAL, INSULATED, COPPER, 600-VOLTS, ELECTRICAL CIRCUITS 
BMS13-4 		WIRE, ELECTRIC, INSULATED, COPPER_ FUEL GAGE CIRCUITS 
BMS13-5 		WIRE, ELECTRICAL, INSULATED, COPPER, 600-VOLT, 212 F, CONDUCTOR TEMPERATURE 
BMS13-6 		CABLE: ELECTRIC, INSULATED, 600 VOLTS 
BMS13-7 		WIRE, ELECTRIC, INSULATED, ALUMINUM, 600-VOLT 
BMS13-8 		WIRE: ELECTRIC, INSULATED HIGH TEMPERATURE (650 F) AND FIRE RESISTANT 
BMS13-9 		WIRE: ELECTRICAL POLYMONOCHLOROTRIFLUOROETHYLENE INSULATED 
BMS13-10 	WIRE, ELECTRIC, INSULATED, HIGH TEMPERATURE 
BMS13-11 	WIRE, ELECTRIC, INSULATED INSTRUMENTATION 
BMS13-12 	WIRE, ELECTRICAL, INSULATED, COPPER, 600-Volt (RMS), 212F CONDUCTOR TEMPERATURE, SKYDROL - 500A RESISTANT 
BMS13-13 	WIRE, ELECTRICAL, INSULATED, COPPER, 600-VOLTS, 212 CONDUCTOR TEMPERATURE, ELECTRONIC CIRCUITS 
BMS13-14 	CABLE, ELECTRIC, MULIT-CONDUCTOR, 600-VOLT, 100C 
BMS13-16 	WIRE, ELECTRIC, POLYTETRAFLUOROETHYLENE INSULATED, SURFACE TREATED 
BMS13-18 	WIRE, ELECTRIC, INSULATED, COPPER, HI-TEMPERATURE, 400F, 600 VOLTS (RMS) 
BMS13-19 	CABLE: COAXIAL, SEMI-FLEXIBLE 
BMS13-21 	CABLE: RADIO-FREQUENCY, COAXIAL 
BMS13-23 	WIRE AND CALBE, THERMOCOUPLE, ISA TYPE K, POLYTETRAFLUOROETHYLENE INSULATED 
BMS13-24 	WIRE AND CABLE, ELECTRICAL INSTRUMENTATION, FLUOROCARBON INSULATED, COPPER AND THERMOCOUPLE 
BMS13-28 	WIRE, ELECTRIC, ABRASION RESISTANT, ECTRUDED TFE, 600 VOLT (RMS, 500 DEGREES F) NICKEL PLATED COPPER CONDUCTOR 
BMS13-29 	EXTRUDED WIRE ELECTRIC, (TFE) INSULATED, 1500 VOLT (RMS) 500F CONDUCTOR TEMPERATURE 
BMS13-30 	WIRE, ELECTRIC, INSULATED, HIGH STRENGTH CONDUCTOR, 600 VOLTS 212 DEGREES F (100 DEGREES C) MAXIMUM CONDUCTOR TEMPERATURE 
BMS13-31 	WIRE, ELECTRIC, ABRASION RESISTANT, EXTRUDED TFE, 600 VOLT (RMS) 260C, NICKEL COATED COPPER CONDUCTOR 
BMS13-35 	WIRE ELECTRIC POLYIMIDE INSULATED, ALUMINUM 600 VOLTS 177C 
BMS13-36 	WIRE: ELECTRIC, POLYIMIDE INSULATED COPPER, 600 VOLT, 400 DEG. F. 
BMS13-37 	WIRE: ELECTRIC, POLYIMIDE INSULATED COPPER ALLOY 600 VOLT, 400 DEG. F 
BMS13-38 	WIRE, ELECTRIC, GENERAL PURPOSE, INSULATED COPPER, 600 VOLTS (RMS), 135C 
BMS13-39 	WIRE, ELECTRIC, INSULATED COPPER, 600 VOLTS (RMS), 135C 
BMS13-40 	WIRE ELECTRIC, INSULATED ALUMINUM, 600 VOLT (RMS), 150C 
BMS13-41 	ELECTRICALLY CONDUCTIVE TAPE 
BMS13-42 	WIRE: ELECTRIC, POLYARYLENE INSULATED COPPER AND COPPER ALLOY, 600V (RMS) 150 C (302 F) 
BMS13-45 	ELECTRICALLY CONDUCTIVE GASKETS 
BMS13-46 	WIRE, ELECTRIC, INSULATED, WRAPPED WIRE TERMINATION 
BMS13-47 	TAPE, LABEL STOCK, WIRE AND BUNDLE IDENTIFICATION 
BMS13-48 	WIRE, ELECTRIC, EXTRUDED CROSS-LINKED ETHYLENETETRAFLUOROETHYLENE, (ETFE) 600 V (RMS) 150 C 
BMS13-49 	WIRE: ELECTRIC, ALKANE-IMIDE INSULATED COPPER AND COPPER ALLOY, 600V (RMS) 150C (302F) 
BMS13-51 	WIRE ELECTRIC POLYIMIDE INSULATED COPPER, AND COPPER ALLOY, 600 VOLT, 150 AND 200C 
BMS13-52 	SLEEVING, EXPANDABLE, BRAIDED 
BMS13-53 	MARKING FOIL, HOT STAMP 
BMS13-54 	LACING TAPE, FLAT BRAID 
BMS13-55 	WIRE, ELECTRIC, INSULATED THIN WALL FIRE RESISTANT, HIGH TEMPERATURE (260C) 
BMS13-56 	CABLE, ELECTRIC, COPPER AND COPPER ALLOY, FLAT - CONDUCTOR, 450 VOLT (RMS), 150C 
BMS13-58 	WIRE ELECTRIC, 600 VOLTS RMS, 260C, NICKEL COATED COPPER CONDUCTOR 
BMS13-59 	FIBER OPTIC CABLE 
BMS13-60 	WIRE ELECTRIC, ARC RESISTANT, 600 VOLTS RMS, ANNEALED COPPER, COPPER ALLOY AND ALUMINUM CONDUCTOR 
BMS13-65 	SILVER COATED CONDUCTOR, PTFE DIELECTRIC, DOUBLE BRAID, LIGHT WEIGHT, 50 OHMS, COAXIAL CABLE 
BMS13-67 	CABLE, ELECTRIC, INSULATED FIRE RESISTANT, HIGH TEMPERATURE (310C) 
BMS13-69 	HEAT SHRINKABLE IDENTIFICATION SLEEVES 
BMS13-71 	CABLE, FIBER OPTIC, MULTIMODE, GRADED INDEX 
BMS13-72 	CABLE, DATABUS, 100 OHMS 
BMS14-2 		DIELECTRIC MATERIAL, HIGH TEMPERATURE 
BMS14-3 		ZIRCONIUM OXIDE 
BMS14-4 		PROTECTIVE COATING, INORGANIC, HEAT, WEATHER AND OIL RESISTANT 
BMS14-7 		REFACTORY DIELECTRIC CASTABLE AND FINISHING MATERIAL 
BMS15-3 		RELEASE SHEET MATERIALS - NON-CONTAMINATION 
BMS15-5 		WIPER, ABSORBENT, PROCESS CLEANING 
BMS15-6 		COMPUTER MAGNETIC TAPE 
BMS15-12 	ALKALINE REMOVABLE TEMPORARY PROTECTIVE COATINGS AND COATING REMOVERS 
BMS15-13 	VACUUM BAGGING MATERIALS 
BMS15-15 	ELECTROSTATIC DISCHARGE PROTECTIVE BAGS AND FILM 
BMS20-1 		GENERAL REQUIREMENTS FOR ALUMINUM ALLOY EXTRUSIONS 
BMS20-2 		GENERAL REQUIREMENTS FOR ALUMINUM ALLOY SHEET AND PLATE 
STB3-13 		HYDRAULIC FLUID, LOW TEMPERATURE, RUST PREVENTATIVE 
STB5-82 		RUBBER, ABLATIVE SILICONE 
STB7-236 		ALUMINUM FILLER METAL, BARE 
STB7-237 		STEEL BAR, FORGING STOCK, AND RINGS, CORROSION RESISTANT, 15Cr-5Ni-4Cu, VACUUM ARC REMELTED 
STB8-140 		CASTING RESIN MICROWAVE ENERGY ABSORBING 
STB8-152 		LAMINATED, COPPER CLAD POLYTETRAFLUOROETHYLENE GLASS 
STB8-153 		ELASTOMER - MICROWAVE ENERGY ABSORBING SILICONE CASTING RESIN 
STB8-188 		STRIPPABLE, FLEXIBLE, ELECTRICAL TERMINAL COATING COMPOUND 
STB10-7 		PRIMER, HIGH TEMPERATURE, MOISTURE RESISTANT 
STB10-84 		COATING SYSTEM, RAIN EROSION & RADIATION THERMAL RESISTANT 

Back to Misc Page